What Precautions Should Be Taken with the Vapor Canister in the Evaporative Emission System to Prevent Explosion or Fire on 2005 Ford Freestar?

The evaporative emission system is full of flammable fuel vapors, and, therefore, the battery ground cable must be disconnected to prevent sparks. Breathing around fuel elements is also forbidden. To install the EVAP canister, remove connectors and hoses, loosen bolts, and install the new one, making sure that the new one is tightened correctly and test the leakage.

OEM 2005 Ford Freestar Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vapor Canister found

View related parts
2005 Ford Freestar Vapor Canister Part Number: 5F2Z-9D653-AA
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Asy - Bracket, Canister And Hoses
- Base No.: 9D653
- Item Weight: 9.00 Pounds
- Item Dimensions: 30.0 x 8.3 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2005 Ford Freestar Vapor Canister

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Freestar Vapor Canister Parts Q&A

Q: What Precautions Should Be Taken with the Vapor Canister in the Evaporative Emission System to Prevent Explosion or Fire on 2005 Ford Freestar?
A: The evaporative emission system is full of flammable fuel vapors, and, therefore, the battery ground cable must be disconnected to prevent sparks. Breathing around fuel elements is also forbidden. To install the EVAP canister, remove connectors and hoses, loosen bolts, and install the new one, making sure that the new one is tightened correctly and test the leakage.