2001 Ford E-250 Econoline Switches

Part Notes: Body side hinged door, w/hinged side door
Rear cargo door

Part Notes: #F75P 7A256-AA - round hole with two flats for 7C493 shaft

Part Notes: Plug - used to plug OSS/TSS hole when sensor is not used., 1C2P-A*,B*,D*

Part Notes: Kit - washers for cooler bypass valve assembly fittings - includes (2) 391932-S100 and (2) 391933-S100 washers, 1C2P-A*,B*,D*

Part Notes: (MM-263-D) Nut, push, 1/4" (7B148 to 7005)

Part Notes: Top cover, fuse panel, passenger compartment

Part Notes: (090-010) Plug - pressure tap - 1/8"-27 x .65", 1C2P-A*,B*,D*

Part Notes: Nut, spring - 3/8" - attaches id tag to case, 1C2P-A*,B*,D*

Part Notes: Side or rear hinged doors, use #E4LY 13C775-A for boot, BEFORE 9/6/05

Part Notes: Note: Kit does not include 7D100 and 7C155 gaskets - must order gaskets separately

Part Notes: (T-1-C) o-ring (7H183 to 7A039), YC2P-E*;1C2P-A*,B*,D*

Part Notes: 1 piece brazed to manual shaft, 1C2P-A*,B*,D*

Part Notes: Pin, dowel - reverse band anchor - 1/2" x .98"

Part Notes: Park brake pedal pad, Used on 2780 with handle release

Part Notes: OSS/TSS from flat of surface on magnetized end is 37 mm long, YC2P-E*,1C2P-A*,B*
OSS/TSS from flat of surface on magnetized end is 37 mm long, YC2P-K*;1C2P-D*

Part Notes: Ball - EPC blow off - .25" - steel, 1C2P-A*,B*,D*

Part Notes: Plug - pipe - 1/8"-27 - (pressure tap ports)

Part Notes: (U-3-A) screw and washer (7H183 to 7A039) 1/4-20 x 0.62, 1C2P-A*,B*,D*

Part Notes: Nut, hex flanged locking - M10-1.5 - attaches 7A256 to 7C493

Part Notes: Fitting used with cooler by-pass tube at rear case fitting, cooler return line, 1C2P-A*,B*,D*,TA,UA,V*