How to service and repair the ignition switch on Lincoln Town Car?

The procedure of servicing and repairing the ignition switch begins with discharging the supplemental restraint system (SRS). Position the ignition switch lock cylinder to RUN before using the suitable tool to push the cylinder release tab upward followed by removing the lock cylinder outward. Start with removing the steering wheel tilt lever and handle before releasing the upper steering column shroud by pressing the sides in. Tighten the three screws that secure the upper and lower steering column shrouds to 2 Nm (18 inch lbs.) after reinstalling them. Start by disconnecting the electrical connector from the ignition switch followed by ignition switch screw removal and pulling out the switch unit before installation when the switch requires torque of 5 Nm (44 inch lbs.). The last step includes reversing the removal sequence while enabling power for the supplemental restraint system (SRS).

OEM Lincoln Town Car Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Switches found

View related parts
Lincoln Town Car Ignition Switch Part Number: F4DZ-11572-B
$46.77 MSRP: $75.45
You Save: $28.68 (39%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-2004 Lincoln Town Car | Anniversary, Base, Cartier, Cartier L, Cypress, Executive, Executive L, Executive Protection Series, Jack Nicklaus, Protection Series, Signature, Touring Edition, Tournament Edition, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Lincoln Town Car Ignition Switch Part Number: F29Z-11572-D
$27.48 MSRP: $43.64
You Save: $16.16 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition; Ignition Starter Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1989 Lincoln Town Car | Base, Cartier, Signature, Signature SE | 8 Cyl 5.0 L GAS
View related parts
Lincoln Town Car Ignition Switch Part Number: 5W1Z-11572-AA
$42.02 MSRP: $66.73
You Save: $24.71 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Lincoln Town Car | Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

Lincoln Town Car Ignition Switch

OEM Ignition Switch boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Ignition Switch with long life and a perfect fit. Come to our website and find genuine Lincoln Town Car parts. We keep a wide inventory of OEM Town Car parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Lincoln Town Car Ignition Switch as its name implies is the key component of the ignition and charging making of the car which is used to start the engine and for the car to operate. It turns on the starter solenoid and ignition parts and such amenities as the radio and power window. Earlier models in the Town Car involved the use of a mechanical keying system but with the newer models they use systems which have push buttons. However, the ignition switch is still a rather easily replaced part, and work is generally done according to the type of Lincoln Town Car.

Lincoln Town Car Ignition Switch Parts and Q&A

Ignition Switch
5W1Z-11572-AA
Q: How to service and repair the ignition switch on Lincoln Town Car?
A:
The procedure of servicing and repairing the ignition switch begins with discharging the supplemental restraint system (SRS). Position the ignition switch lock cylinder to RUN before using the suitable tool to push the cylinder release tab upward followed by removing the lock cylinder outward. Start with removing the steering wheel tilt lever and handle before releasing the upper steering column shroud by pressing the sides in. Tighten the three screws that secure the upper and lower steering column shrouds to 2 Nm (18 inch lbs.) after reinstalling them. Start by disconnecting the electrical connector from the ignition switch followed by ignition switch screw removal and pulling out the switch unit before installation when the switch requires torque of 5 Nm (44 inch lbs.). The last step includes reversing the removal sequence while enabling power for the supplemental restraint system (SRS).