How to Service and Repair the Steering Shaft on Lincoln Navigator?

The first step for steering column shaft servicing and repair requires hoisting the vehicle with neutral transmission. The Hunter(R) 28-75-1 holding device or an equivalent product should maintain a straight-ahead position for the steering wheel. During intermediate shaft removal you need to stop the steering column shaft from any movement because this action could damage the clock spring although rotation requires clock spring realignment. Unglue the upper steering column shaft from the steering column by taking out the bolt then discard it before installing a new bolt which requires a torque setting of 30 Nm (22 lb-ft). Separate the upper steering column shaft from the lower steering column shaft now that you have removed its bolt to discarding it before installing a new bolt and tightening it to 48 Nm (35 lb-ft). The installation requires tightening the new components to 12 Nm (106 lb-in) after removing the two bolts, the dash seal and upper steering column shaft. The lower steering column shaft needs its steering gear bolt replaced and discarded before installation with a new bolt creating 30 Nm (22 lb-ft) torque. Steering column shaft bolts must always be replaced with new ones because their reuse will cause fastener failure and dangerous loss of steering control for vehicle occupants. The completion steps for installation follow the reverse order of removal.

How to Service and Repair the Steering Shaft on Lincoln Town Car?

The first step for steering column shaft maintenance starts with using supplemental restraint system (SRS) depowering procedures while putting the steering wheel into a straight-ahead position without an ignition key. Steer away from turning the steering wheel during intermediate shaft disconnect since it could damage the Clock Spring. Reinstallation of the Clock Spring might be necessary if the intermediate shaft rotates. Disconnect the intermediate shaft by removing its upper steering column bolt first. Then discard this hardware and install the new bolt with 30 Nm (22 ft. lbs) torque tightness after installation. Before attaching the new bearings install each one while tightening them to 11 Nm (8 ft. lbs). First remove the lower intermediate shaft-to-steering gear bolt and discard it before extracting the shaft while tightening the new component to 30 Nm (22 ft. lbs). The installation process ends with following the opposite order of the removal procedure.

OEM Lincoln Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

38 Steering Shafts found

View related parts
Lincoln Steering Shaft, Upper Part Number: F5TZ-3524-A
$125.09 MSRP: $192.50
You Save: $67.41 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft; Steering Shaft, Upper; Shaft Assembly; Upper Shaft
- Position: Upper
Fits the following Lincoln Models:
- Navigator | 1998-2002 | Base | 8 Cyl 5.4 L GAS
View related parts
Lincoln Shaft & Joint, Lower Part Number: 5W1Z-3B676-A
$80.90 MSRP: $124.50
You Save: $43.60 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Steering Shaft; Lower Shaft
- Position: Lower
- Replaces: 5W1Z-3B676-AA, 3W1Z-3B676-AA
Fits the following Lincoln Models:
- Town Car | 2003-2011 | Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Upper Shaft Part Number: F7DZ-7361-A
$44.32 MSRP: $54.82
You Save: $10.50 (20%)
ADD TO CART
Product Specifications
- Other Name: Plunger - Gear Change Shaft Lock; Steering Shaft; Shift Lever Shaft; Shift Tube Shaft; Plunger; Shaft
- Replaces: F7DZ-7R264-AA, FODZ-7R264-A
Fits the following Lincoln Models:
- Blackwood | 2002 | Base | 8 Cyl 5.4 L GAS
- Navigator | 1998-2002 | Base | 8 Cyl 5.4 L GAS
- Town Car | 1990-2004 | Anniversary, Base, Cartier, Cartier L, Cypress, Executive, Executive L, Executive Protection Series, Jack Nicklaus, Protection Series, Signature, Touring Edition, Tournament Edition, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View More
View related parts
Lincoln Intermediate Shaft, Upper Part Number: FL1Z-3E751-C
$235.40 MSRP: $366.67
You Save: $131.27 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Center Shaft; Upper Shaft; Steering Shaft
- Position: Upper
- Replaces: FL1Z-3E751-A, FL1Z-3E751-B
Fits the following Lincoln Models:
- Navigator | 2007-2017 | Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Lincoln Shaft Assembly, Lower Part Number: BB5Z-3B676-C
$325.75 MSRP: $521.82
You Save: $196.07 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering Shaft, Lower; Steering Shaft; Lower Shaft
- Position: Lower
- Replaces: AA8Z-3B676-A, BB5Z-3B676-B, BB5Z-3B676-A
Fits the following Lincoln Models:
- MKT | 2013-2019 | Base, EcoBoost, Livery, Premiere, Reserve | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Lower Shaft Part Number: NL1Z-3B676-A
$275.92 MSRP: $405.17
You Save: $129.25 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly
Fits the following Lincoln Models:
- Navigator | 2022-2024 | Base, Black Label, L Base, L Black Label, L Livery, L Reserve, Reserve | 6 Cyl 3.5 L GAS
View related parts
Lincoln Intermediate Shaft Part Number: L1MZ-3E751-D
$264.68 MSRP: $388.67
You Save: $123.99 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Center Shaft; Upper Shaft
- Replaced by: L1MZ-3E751-C
Fits the following Lincoln Models:
- Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Intermediate Shaft, Upper Part Number: NL1Z-3E751-A
$267.18 MSRP: $392.33
You Save: $125.15 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Upper Shaft
- Position: Upper
Fits the following Lincoln Models:
- Navigator | 2018-2024 | Base, Black Label, L Base, L Black Label, L Livery, L Reserve, L Select, Premiere, Reserve, Select | 6 Cyl 3.5 L GAS
View related parts
Lincoln Lower Shaft Part Number: FL1Z-3B676-A
$260.94 MSRP: $383.17
You Save: $122.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Lower Coupling; Steering Shaft
- Position: Lower
Fits the following Lincoln Models:
- Navigator | 2015-2017 | Base, L, L Reserve, L Select, Reserve, Select | 6 Cyl 3.5 L GAS
View related parts
Lincoln Intermediate Shaft Part Number: LX6Z-3B676-A
$254.69 MSRP: $374.00
You Save: $119.31 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft; Lower Shaft
- Replaced by: LX6Z-3B676-M
Fits the following Lincoln Models:
- Corsair | 2020-2023 | Base, Grand Touring, Reserve | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Lower Shaft Part Number: L1MZ-3B676-B
$221.33 MSRP: $325.00
You Save: $103.67 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly
- Replaces: L1MZ-3B676-A
Fits the following Lincoln Models:
- Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Lincoln Shaft Assembly, Upper Part Number: YW7Z-3524-AA
$35.61 MSRP: $48.46
You Save: $12.85 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Column Shaft; Upper Shaft; Mainshaft; Steering Shaft
- Manufacturer Note: Upper shaft and yoke
- Position: Upper
- Replaces: F8AZ-3524-AA
Fits the following Lincoln Models:
- Continental | 1998-2002 | Base | 8 Cyl 4.6 L GAS
- Town Car | 1998-2004 | Base, Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
View related parts
Lincoln Steering Column Part Number: 8E5Z-3524-C
$184.03 MSRP: $254.58
You Save: $70.55 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering
- Replaces: 8E5Z-3524-B, 6E5Z-3524-AA
Fits the following Lincoln Models:
- MKZ | 2007-2009 | Base | 6 Cyl 3.5 L GAS
- Zephyr | 2006 | Base | 6 Cyl 3.0 L GAS
View related parts
Lincoln Upper Shaft Part Number: YR3Z-3524-AA
$61.94 MSRP: $84.28
You Save: $22.34 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft, Upper; Steering Shaft
- Manufacturer Note: Upper shaft and yoke
- Position: Upper
Fits the following Lincoln Models:
- Mark VIII | 1996 | Anniversary, LSC | 8 Cyl 4.6 L GAS
View related parts
Lincoln Steering Column Part Number: F2TZ-3E751-A
$105.79 MSRP: $143.96
You Save: $38.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Coupling; Yoke Assembly; Lower Coupling; Lower Joint Assembly; Yoke
- Replaces: F3DZ-3N725-A
Fits the following Lincoln Models:
- Mark VII | 1990-1992 | Bill Blass, LSC | 8 Cyl 5.0 L GAS
- Mark VIII | 1993-1996 | Anniversary, Base, LSC | 8 Cyl 4.6 L GAS
- Town Car | 1990-1994 | Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View More
View related parts
Lincoln Lower Shaft Part Number: F75Z-3B676-CA
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower; Steering Shaft
- Position: Lower
Fits the following Lincoln Models:
- Blackwood | 2002 | Base | 8 Cyl 5.4 L GAS
View related parts
Lincoln Upper Shaft Part Number: 2C5Z-3E751-CA
Product Specifications
- Other Name: Shaft Assembly - Steering; Steering Shaft; Lower Shaft
Fits the following Lincoln Models:
- Aviator | 2003-2005 | Base | 8 Cyl 4.6 L GAS
View related parts
Lincoln Upper Shaft, Lower Part Number: 6L1Z-3B676-AA
Product Specifications
- Other Name: Shaft Assembly; Steering Shaft, Lower, Upper; Lower Shaft; Steering Shaft
- Position: Lower
Fits the following Lincoln Models:
- Navigator | 2003-2006 | Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS
View related parts
Lincoln Shaft Assembly, Lower Part Number: 5W4Z-3B676-AA
Product Specifications
- Other Name: Steering Shaft, Lower; Lower Shaft; Steering Shaft
- Position: Lower
- Replaces: 3W4Z-3B676-CA
Fits the following Lincoln Models:
- LS | 2000-2006 | Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
View related parts
Lincoln Steering Coupling Part Number: F5OY3B676A
Product Specifications
- Other Name: Coupling & Universal Joint - Steering; Steering Shaft; Lower Shaft; Coupling And Uj - Steering Shaft
Fits the following Lincoln Models:
- Continental | 1995-1997 | Anniversary, Diamond Anniversary, Signature, Spinnaker Edition | 8 Cyl 4.6 L GAS

| Page 1 of 2 |Next >

1-20 of 38 Results

Lincoln Steering Shaft

OEM Steering Shaft boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Steering Shaft with long life and a perfect fit. Come to our website and find genuine Lincoln parts. We keep a wide inventory of OEM parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Lincoln Steering Shaft Parts and Q&A

Intermediate Shaft, Center
7L1Z-3E751-A
Q: How to Service and Repair the Steering Shaft on Lincoln Navigator?
A:
The first step for steering column shaft servicing and repair requires hoisting the vehicle with neutral transmission. The Hunter(R) 28-75-1 holding device or an equivalent product should maintain a straight-ahead position for the steering wheel. During intermediate shaft removal you need to stop the steering column shaft from any movement because this action could damage the clock spring although rotation requires clock spring realignment. Unglue the upper steering column shaft from the steering column by taking out the bolt then discard it before installing a new bolt which requires a torque setting of 30 Nm (22 lb-ft). Separate the upper steering column shaft from the lower steering column shaft now that you have removed its bolt to discarding it before installing a new bolt and tightening it to 48 Nm (35 lb-ft). The installation requires tightening the new components to 12 Nm (106 lb-in) after removing the two bolts, the dash seal and upper steering column shaft. The lower steering column shaft needs its steering gear bolt replaced and discarded before installation with a new bolt creating 30 Nm (22 lb-ft) torque. Steering column shaft bolts must always be replaced with new ones because their reuse will cause fastener failure and dangerous loss of steering control for vehicle occupants. The completion steps for installation follow the reverse order of removal.
Shaft & Joint, Lower
5W1Z-3B676-A
Q: How to Service and Repair the Steering Shaft on Lincoln Town Car?
A:
The first step for steering column shaft maintenance starts with using supplemental restraint system (SRS) depowering procedures while putting the steering wheel into a straight-ahead position without an ignition key. Steer away from turning the steering wheel during intermediate shaft disconnect since it could damage the Clock Spring. Reinstallation of the Clock Spring might be necessary if the intermediate shaft rotates. Disconnect the intermediate shaft by removing its upper steering column bolt first. Then discard this hardware and install the new bolt with 30 Nm (22 ft. lbs) torque tightness after installation. Before attaching the new bearings install each one while tightening them to 11 Nm (8 ft. lbs). First remove the lower intermediate shaft-to-steering gear bolt and discard it before extracting the shaft while tightening the new component to 30 Nm (22 ft. lbs). The installation process ends with following the opposite order of the removal procedure.