How to Bleed the Brake System After Replacing the Front ABS Control Module on Lincoln Continental?

The procedure to bleed the brake system includes cleaning around the brake master cylinder filler cap and removing the cap to add specified brake fluid into the reservoir before replacement of 4-Wheel Anti-Lock Brake (4WABS) Hydraulic Control Unit (HCU) or HCU line opening. A clear waste line needs to be connected to the RH rear bleeder screw with its opposite end located in a container that contains recommended brake fluid but is not completely full. Tighten the RH rear bleeder screw with the assistance of an assistant who applies brake pedal pressure. Maintain brake pressure as you continue tightnening the screw until brake fluid runs steadily from the screw. Complete this routine by observing clear fluid with no bubbles emerging from the reservoir and then make necessary top-offs to the brake master cylinder reservoir. Start by tightening the RH rear bleeder screw then disconnect the waste line before going to the LH rear bleeder screw followed by the RH front disc brake caliper bleeder screw and concluding with the LH front disc brake caliper bleeder screw where you will repeat the same procedures. The scan tool DCL cable adapter needs connection to the Data Link Connector (DLC) underneath the dash before following provided scan tool instructions. The entire bleeding process should be executed once more according to the previous method.

OEM Lincoln Continental ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 ABS Control Modules found

View related parts
Lincoln Continental Control Module Part Number: G3GZ-2C219-K
$469.44 MSRP: $636.31
You Save: $166.87 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module; ABS Control Unit
- Replaces: G3GZ-2C219-J, G3GZ-2C219-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2020 Lincoln Continental | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Continental Control Module Part Number: G3GZ-2C219-F
$540.60 MSRP: $732.77
You Save: $192.17 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module; ABS Control Unit
- Manufacturer Note: ECU only
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2018 Lincoln Continental | Black Label, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Continental Control Module Part Number: G3GZ-2C219-E
$387.04 MSRP: $524.62
You Save: $137.58 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module; ABS Control Unit
- Manufacturer Note: ECU only
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Continental ABS Control Unit Part Number: G3GZ-2C219-D
$384.54 MSRP: $521.23
You Save: $136.69 (27%)
ADD TO CART
Product Specifications
- Other Name: Control; ABS Control Module
- Manufacturer Note: ECU only
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Continental Control Module Part Number: G3GZ-2C215-D
$518.13 MSRP: $702.31
You Save: $184.18 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module; ABS Control Module; Modulator Valve
- Manufacturer Note: HCU Only
- Replaces: G3GZ-2C215-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Continental Control Module Part Number: XF3Z-2C219-AA
Product Specifications
- Other Name: Control; ABS Control Module
- Manufacturer Note: ECU
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Lincoln Continental | Base | 8 Cyl 4.6 L GAS
View related parts
Lincoln Continental Control Module Part Number: G3GZ-2C219-G
Product Specifications
- Other Name: Control; ABS Control Module
- Manufacturer Note: ECU only
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Lincoln Continental | 80th Anniversary Coach Door Edition, Base, Black Label, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln Continental Control Module Part Number: G3GZ-2C215-C
Product Specifications
- Other Name: Module; ABS Control Module; Modulator Valve
- Manufacturer Note: HCU Only
- Replaces: G3GZ-2C215-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS

Lincoln Continental ABS Control Module

OEM ABS Control Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get ABS Control Module with long life and a perfect fit. Come to our website and find genuine Lincoln Continental parts. We keep a wide inventory of OEM Continental parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Lincoln Continental ABS Control Module is one among the important part of the anti-lock braking system, which is acclaimed for its dependability and effectiveness in the area of the vehicle safety. This module operates a critical function of controlling wheel lock-up especially when the Lincoln Continental is actively utilizing the brake pedal, and ensuring that the car gets the optimal possible adherence to the road. Equipped with full set of wheel speed sensors, valves, hydraulic pump together with an electronic control unit (ECU), the brake pressure is modulated dynamically in real sense to minimize slippage thereby enhancing safety. This ABS Control Module fits wide Lincoln Continental models and in addition to improving braking capacity, it also host complex safety systems including the Electronic Stability Control (ESC) and Traction Control which are used for enhancing the vehicle stability especially in bad weather conditions. This efficiency is enhanced by its real time diagnosing to make sure that any fouls have been identified for rectification on time making Lincoln Continental ABS Control Module reputable. These characteristics and the focus on the high-quality result allow the Lincoln Continental ABS Control Module to be considered an asset key to the automotive field. Being the critical element of the successful Lincoln Continental platform, the Lincoln Continental ABS Control Module reflects the company's dedication to safety, efficiency, and reliability of the brand's automobile production.

Lincoln Continental ABS Control Module Parts and Q&A

Control Module
XF3Z-2C219-AA
Q: How to Bleed the Brake System After Replacing the Front ABS Control Module on Lincoln Continental?
A:
The procedure to bleed the brake system includes cleaning around the Brake Master Cylinder filler cap and removing the cap to add specified brake fluid into the reservoir before replacement of 4-Wheel Anti-Lock Brake (4WABS) Hydraulic Control Unit (HCU) or HCU line opening. A clear waste line needs to be connected to the RH rear bleeder screw with its opposite end located in a container that contains recommended brake fluid but is not completely full. Tighten the RH rear bleeder screw with the assistance of an assistant who applies brake pedal pressure. Maintain brake pressure as you continue tightnening the screw until brake fluid runs steadily from the screw. Complete this routine by observing clear fluid with no bubbles emerging from the reservoir and then make necessary top-offs to the brake master cylinder reservoir. Start by tightening the RH rear bleeder screw then disconnect the waste line before going to the LH rear bleeder screw followed by the RH front disc brake caliper bleeder screw and concluding with the LH front disc brake caliper bleeder screw where you will repeat the same procedures. The scan tool DCL cable adapter needs connection to the Data Link Connector (DLC) underneath the dash before following provided scan tool instructions. The entire bleeding process should be executed once more according to the previous method.