How to service the rear ABS sensor on Ford Windstar?

The first step to service the rear ABS sensor requires vehicle elevation followed by support. You need to disconnect the anti-lock brake sensor electrical connector and remove the sensor by extracting its bolt. High Temperature 4x4 Front Axle and Wheel Bearing Grease E8TZ-19590-A should be used for sensor mounting surfaces after proper cleaning as an alternative to the specified Ford specification ESA-M1C198-A. The installation ends by repeating the steps for sensor removal.

How to service the front ABS sensor on Ford Windstar?

The service process for front ABS sensors requires the operator to start by disconnecting the battery ground cable followed by vehicle lifting and support operations. The operation begins with disconnection of the ABS sensor electrical connector followed by bolt removal of the front wheel knuckle ABS sensor cable clip. Unbolt the ABS sensor while also extracting it from the front wheel knuckle after disconnecting its electrical connector and cable clip bolt. The installation requires the opposite approach to removal. After disconnecting and reconnecting the battery, the vehicle will usually show unusual driving behaviors while it learns its adaptive strategy, having to drive at least 16 km (10 miles) to complete the relearning sequence.

OEM Ford Windstar ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 ABS Sensors found

View related parts
Ford Windstar ABS Sensor, Driver Side Part Number: F58Z-2C204-BA
$55.85 MSRP: $76.00
You Save: $20.15 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Driver Side Part Number: XF2Z-2C216-AB
$120.98 MSRP: $164.63
You Save: $43.65 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Rear Speed Sensor
- Manufacturer Note: LH, w/front disc/rear drum
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Windstar | 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Driver Side Part Number: XF2Z-2C205-AC
$103.61 MSRP: $140.99
You Save: $37.38 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Windstar | 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Passenger Side Part Number: XF2Z-2C204-AC
$103.40 MSRP: $140.71
You Save: $37.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; ABS Speed Sensor; Front Speed Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Windstar | 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Passenger Side Part Number: XF2Z-2C190-AB
$81.83 MSRP: $111.36
You Save: $29.53 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Rear Speed Sensor
- Manufacturer Note: RH, w/front disc/rear drum
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Windstar | 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Driver Side Part Number: F78Z-2C216-BB
$29.21 MSRP: $40.41
You Save: $11.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Rear Speed Sensor
- Manufacturer Note: LH , w/front disc/rear drum
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Passenger Side Part Number: F58Z-2C204-AA
$26.94 MSRP: $37.27
You Save: $10.33 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Front Speed Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Passenger Side Part Number: F78Z-2C190-BB
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor; Rear Speed Sensor
- Manufacturer Note: RH , w/front disc/rear drum
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Driver Side Part Number: XF2Z-2C216-BD
Product Specifications
- Other Name: Sensor Assembly; Rear Speed Sensor
- Manufacturer Note: LH, Power 4 wheel disc
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Windstar | 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Passenger Side Part Number: XF2Z-2C190-BC
Product Specifications
- Other Name: Sensor Assembly; Rear Speed Sensor
- Manufacturer Note: RH, power 4 wheel disc
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2003 Ford Windstar | 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Passenger Side Part Number: F88Z-2C190-AB
Product Specifications
- Other Name: Sensor Assembly; Rear Speed Sensor
- Manufacturer Note: RH, 4 wheel disc
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar ABS Sensor, Driver Side Part Number: F58Z-2C190-EA
Product Specifications
- Other Name: Sensor Assembly; Rear Speed Sensor
- Manufacturer Note: LH, Power 4 wheel disc
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Windstar | Base, GL, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

Ford Windstar ABS Sensor

OEM ABS Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get ABS Sensor with long life and a perfect fit. Come to our website and find genuine Ford Windstar parts. We keep a wide inventory of OEM Windstar parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The part known as the Ford Windstar ABS Sensor may be considered an important element of making Ford Windstar vehicles secure and unreliable during the period from 1995 to 2007. The Wheel Speed Sensor, specifically this ABS Sensor, is instrumental in detecting the rate of wheel rotation as means of information input to the car's computer for the determination as to when to initiate the operation of the Anti-Lock Braking System. Using cutting-edge solutions like magnet and Hall effect sensors or toothed wheels with electromagnetic coils, the Ford Windstar ABS Sensor creates voltage signals followed by the ABS modifying the pressure regulating braking and halting the wheel lock-up during the emergencies. This aspect has greatly improved the Ford Windstar and specifically the safety of the vehicle not forgetting its effectiveness in meeting the needs of the customer. Meant to be compatible with various Windstar models, the ABS Sensor is made to work efficiently in different driving environment. Perhaps, the Ford Windstar ABS Sensor is one of the best models on the automotive market, which possesses rather durable construction and fine accuracy of operation. It may not be as accurate though, during low speeds; however, its efficiency in improving the safety of the brake cannot be doubted. Thus, relying on the family-oriented Minivan concept and concentrating on reliable supplies, The Ford Windstar enhances its dependability with the efficient addition of the ABS Sensor. All in all, the Ford Windstar ABS Sensor is one of the most vital features that make the Ford Windstar safe and perform well in the competitive automobile market.

Ford Windstar ABS Sensor Parts and Q&A

ABS Sensor, Passenger Side
XF2Z-2C190-BC
Q: How to service the rear ABS sensor on Ford Windstar?
A:
The first step to service the rear ABS sensor requires vehicle elevation followed by support. You need to disconnect the anti-lock brake sensor electrical connector and remove the sensor by extracting its bolt. High Temperature 4x4 Front Axle and Wheel Bearing Grease E8TZ-19590-A should be used for sensor mounting surfaces after proper cleaning as an alternative to the specified Ford specification ESA-M1C198-A. The installation ends by repeating the steps for sensor removal.
ABS Sensor, Driver Side
XF2Z-2C216-BD
Q: How to service the front ABS sensor on Ford Windstar?
A:
The service process for front ABS sensors requires the operator to start by disconnecting the battery ground cable followed by vehicle lifting and support operations. The operation begins with disconnection of the ABS sensor electrical connector followed by bolt removal of the front wheel knuckle ABS sensor cable clip. Unbolt the ABS sensor while also extracting it from the front wheel knuckle after disconnecting its electrical connector and cable clip bolt. The installation requires the opposite approach to removal. After disconnecting and reconnecting the battery, the vehicle will usually show unusual driving behaviors while it learns its adaptive strategy, having to drive at least 16 km (10 miles) to complete the relearning sequence.