How to service and repair the lower control arm bushing on Ford Taurus?

First mark the position of the bushing on the lower arm before taking it off and separating the lower arm bushing for service work. A Drive Pinion Bearing Cone Remover secures the lower arm bushing in place using a suitable press and adapters to detach it from the lower arm. You can install the lower arm by clamping it in the Drive Pinion Bearing Cone Remover and then placing its index mark onto the new bushing. Use the bearing removal tool to connect adapter tools then put in the fresh lower arm bushing on its designated placement.

OEM Ford Taurus Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arm Bushings found

View related parts
Ford Taurus Lower Control Arm Rear Bushing Part Number: 8A8Z-5A638-B
$28.20 MSRP: $40.00
You Save: $11.80 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush; Suspension Control Arm Bushing, Rear Lower; Lower Control Arm Inner Bushing; Suspension Control Arm Bushing; Insulator; Bushings
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Strut Rod Bushing Part Number: E6DZ-3B271-A
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Bush; Suspension Control Arm Bushing; Control Arm Bushing; Lower Control Arm Center Bushing; Strut Rod Front Bushing; Tension Strut Bushing; Bushing; Bushings
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1995 Ford Taurus | GL, L, LX, MT5, SE, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Lower Control Arm Bushing, Front Part Number: F6DZ-3C067-AD
$10.52 MSRP: $14.55
You Save: $4.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush - Front Suspension; Suspension Control Arm Bushing, Front Forward; Axle Pivot Bushing; Bushings; Bush - Front Suspension Arm; Suspension Control Arm Bushing; Control Arm Bushing
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2007 Ford Taurus | G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Rear Insulator Part Number: DE9Z-5400155-B
$69.73 MSRP: $107.32
You Save: $37.59 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator; Coil Spring Insulator; Engine Cradle Front Bushing
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Lower Control Arm Bushing, Front Part Number: BA5Z-3C377-C
Product Specifications
- Other Name: Bushing; Suspension Control Arm Bushing, Front; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Lower Control Arm Front Bushing; Bushings; Control Arm Bushing
- Manufacturer Note: Serviced In 3078 Or 3079 As Needed
- Position: Front
- Replaces: BA5Z-3C377-A, BA5Z-3C377-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Lower Control Arm Bushing, Front Part Number: E6DZ-3C067-A
Product Specifications
- Other Name: Bush - Front Suspension Arm; Control Arm Bushing; Axle Pivot Bushing; Strut Rod Bushing; Strut Rod Rear Bushing; Insulator
- Manufacturer Note: 3.8L
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995 Ford Taurus | GL, L, LX, SE, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS

Ford Taurus Control Arm Bushing

OEM Control Arm Bushing boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Control Arm Bushing with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Control Arm Bushing is located in Ford Taurus vehicles and is specifically an element of suspension system; these act as bushing on the control arms. These metal sleeves with insulating material dampen vibrations and minimize friction, and the control arms can move in relation to the road's surface and the operation of the steering. There are the bushings made from rubber, steel, aluminum, polyurethane, and synthetic elastomer and every material type has peculiarities in its durability and performance. What one needs to look for when shopping for replacement control arm bushings is the material used and what it is going to be used for. Control arm bushings can wear out reducing the usual suspension and also the wheel assembly thus it is essential that a lookout be made for any signs that may indicate that the bushings are worn out.

Ford Taurus Control Arm Bushing Parts and Q&A

Lower Control Arm Bushing, Front
BA5Z-3C377-C
Q: How to service and repair the lower control arm bushing on Ford Taurus?
A:
First mark the position of the bushing on the lower arm before taking it off and separating the lower arm bushing for service work. A Drive Pinion Bearing Cone Remover secures the lower arm bushing in place using a suitable press and adapters to detach it from the lower arm. You can install the lower arm by clamping it in the Drive Pinion Bearing Cone Remover and then placing its index mark onto the new bushing. Use the bearing removal tool to connect adapter tools then put in the fresh lower arm bushing on its designated placement.