What Precautions Should Be Taken Before Servicing the Ride Height Sensor on Ford Crown Victoria?

Before working on the suspension height sensor check that air suspension electrical power is off by disabling the air suspension switch found in the LH rear quarter trim panel to stop unexpected air spring inflation or deflation that could result in vehicle shifting while working which poses personal injury risks. A replacement requires parts that match the original part number or its equivalent when using new components because these suspension fasteners directly affect vital component performance; use of inferior designs or substitutes is forbidden. Proper retention of repair parts depends on always using the specified torque values when reconstructing assembly operations. To start the procedure activation the air suspension service switch needs to be turned off before putting the vehicle into neutral mode and hoisting it. The process starts with disconnecting the battery ground cable while also taking away the connection links for the suspension height sensor electrical connector and suspension height sensor. Install the height sensor by tightly fastening it to 25 Nm (18 lb-ft) using new bracket bolts that will be fitted to the height sensor brackets. The installation requires performing the direct opposite of all removal steps to achieve successful completion.

How to service and repair the ride height sensor on Ford Expedition?

The proper servicing and repair of ride height sensors requires the air suspension power to be switched off by using the air suspension switch inside the LH quarter trim panel because skipping this step could trigger unpredictable air spring deflation or inflation and result in vehicle movement during operations. The vehicle needs support during this operation after all power has been turned off. The sensor arm must be disconnected first before removing bolts that secure the sensor while removing the electrical connector. The installment procedure will be finished by following the backward steps used for removal.

OEM Ford Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Ride Height Sensors found

View related parts
Ford Position Sensor, Rear Part Number: 8W1Z-5359-A
$103.15 MSRP: $150.15
You Save: $47.00 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Suspension; Suspension Ride Height Sensor, Rear; Height Sensor; Suspension Ride Height Sensor; Ride Height Sensor
- Position: Rear
- Replaces: 6W1Z-5359-A, 7W1Z-5359-A
Fits the following Ford Models:
- Crown Victoria | 2003-2011 | Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Height Sensor Part Number: PC3Z-3C097-D
$93.96 MSRP: $136.77
You Save: $42.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly
Fits the following Ford Models:
- F-250 Super Duty | 2023 | XL | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2023 | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford Level Sensor, Passenger Side Part Number: LK9Z-5A967-A
$116.25 MSRP: $169.22
You Save: $52.97 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket And Lever Assembly; Ride Height Sensor; Height Sensor
- Position: Passenger Side
Fits the following Ford Models:
- Mustang Mach-E | 2021-2023 | California Route 1, First Edition, GT, Premium, Select | BATTERY EV (EV/BEV)
View related parts
Ford Height Sensor, Driver Side Part Number: PR3Z-5A967-B
$119.02 MSRP: $173.25
You Save: $54.23 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket And Lever Assembly
- Position: Driver Side
Fits the following Ford Models:
- Mustang | 2024 | Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Level Sensor, Driver Side Part Number: LJ9Z-5A967-A
$107.18 MSRP: $156.02
You Save: $48.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket And Lever Assembly; Ride Height Sensor; Height Sensor
- Position: Driver Side
Fits the following Ford Models:
- Mustang Mach-E | 2021-2023 | California Route 1, First Edition, GT, Premium, Select | BATTERY EV (EV/BEV)
View related parts
Ford Level Sensor, Front Passenger Side Part Number: LK9Z-3C097-A
$122.68 MSRP: $178.57
You Save: $55.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Suspension Ride Height Sensor, Front Right, Rear Right; Ride Height Sensor; Height Sensor
- Position: Front Passenger Side
Fits the following Ford Models:
- Mustang Mach-E | 2021-2023 | California Route 1, First Edition, GT, Premium, Select | BATTERY EV (EV/BEV)
View related parts
Ford Height Sensor, Passenger Side Part Number: 6L1Z-5359-CC
$167.44 MSRP: $258.40
You Save: $90.96 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Suspension; Suspension Ride Height Sensor, Right; Ride Height Sensor; Sensor
- Position: Passenger Side
Fits the following Ford Models:
- Expedition | 2002-2006 | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Level Sensor, Front Driver Side Part Number: LJ9Z-3C097-B
$111.59 MSRP: $162.43
You Save: $50.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Suspension Ride Height Sensor, Front Left, Rear Left; Height Sensor
- Position: Front Driver Side
- Replaces: LJ9Z-3C097-A
Fits the following Ford Models:
- Mustang Mach-E | 2021-2023 | California Route 1, First Edition, GT, Premium, Select | BATTERY EV (EV/BEV)
View related parts
Ford Height Sensor, Passenger Side Part Number: PR3Z-5A967-A
$129.73 MSRP: $188.83
You Save: $59.10 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket And Lever Assembly
- Position: Passenger Side
Fits the following Ford Models:
- Mustang | 2024 | Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Height Sensor, Driver Side Part Number: PR3Z-3C097-B
$74.65 MSRP: $108.67
You Save: $34.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly
- Position: Driver Side
- Replaced by: PR3Z-3C097-D
Fits the following Ford Models:
- Mustang | 2024 | Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Height Sensor, Passenger Side Part Number: PR3Z-3C097-A
$74.65 MSRP: $108.67
You Save: $34.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly
- Position: Passenger Side
- Replaced by: PR3Z-3C097-C
Fits the following Ford Models:
- Mustang | 2024 | Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Height Sensor Part Number: FR3Z-5A967-D
$76.12 MSRP: $117.15
You Save: $41.03 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket And Lever Assembly
Fits the following Ford Models:
- Mustang | 2015-2023 | Bullitt, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Height Sensor Part Number: ML3Z-3C097-C
$72.19 MSRP: $111.10
You Save: $38.91 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Ride Height Sensor
- Replaced by: ML3Z-3C097-H
Fits the following Ford Models:
- F-150 | 2021-2023 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, Raptor R, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.2 L GAS
View related parts
Ford Front Sensor, Passenger Side Part Number: JL1Z-3C097-C
$74.06 MSRP: $107.80
You Save: $33.74 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Suspension Ride Height Sensor, Front Right; Ride Height Sensor
- Position: Front Passenger Side
- Replaces: JL1Z-3C097-A
Fits the following Ford Models:
- Expedition | 2018-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Position Sensor Part Number: F5VY-5359-A
Product Specifications
- Other Name: Sensor Assembly; Ride Height Sensor; Height Sensor
- Manufacturer Note: standard handling
Fits the following Ford Models:
- Crown Victoria | 1995-1997 | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Height Sensor Part Number: F75Z-5359-AA
Product Specifications
- Other Name: Sensor - Air Suspension; Suspension Ride Height Sensor; Ride Height Sensor
Fits the following Ford Models:
- Expedition | 1997-2002 | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Height Sensor Part Number: F77Z-5359-BA
Product Specifications
- Other Name: Sensor Assembly; Suspension Ride Height Sensor; Ride Height Sensor
Fits the following Ford Models:
- Explorer | 1995-2005 | Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Position Sensor Part Number: F8AZ-5359-AA
Product Specifications
- Other Name: Sensor - Air Suspension; Ride Height Sensor; Height Sensor
Fits the following Ford Models:
- Crown Victoria | 1998-2002 | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Position Sensor Part Number: FOVY-5359-A
Product Specifications
- Other Name: Sensor - Air Suspension; Ride Height Sensor; Height Sensor
- Manufacturer Note: standard handling
Fits the following Ford Models:
- Crown Victoria | 1992-1994 | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Height Sensor Part Number: F75Z-5359-BA
Product Specifications
- Other Name: Sensor Assembly; Suspension Ride Height Sensor; Ride Height Sensor
Fits the following Ford Models:
- F-250 | 1997-1999 | Base, Lariat, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 33 Results

Ford Ride Height Sensor

OEM Ride Height Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Ride Height Sensor with long life and a perfect fit. Come to our website and find genuine Ford parts. We keep a wide inventory of OEM parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Ride Height Sensor Parts and Q&A

Position Sensor, Rear
8W1Z-5359-A
Q: What Precautions Should Be Taken Before Servicing the Ride Height Sensor on Ford Crown Victoria?
A:
Before working on the suspension height sensor check that air suspension electrical power is off by disabling the air suspension switch found in the LH rear quarter trim panel to stop unexpected air spring inflation or deflation that could result in vehicle shifting while working which poses personal injury risks. A replacement requires parts that match the original part number or its equivalent when using new components because these suspension fasteners directly affect vital component performance; use of inferior designs or substitutes is forbidden. Proper retention of repair parts depends on always using the specified torque values when reconstructing assembly operations. To start the procedure activation the air suspension service switch needs to be turned off before putting the vehicle into neutral mode and hoisting it. The process starts with disconnecting the battery ground cable while also taking away the connection links for the suspension height sensor electrical connector and suspension height sensor. Install the height sensor by tightly fastening it to 25 Nm (18 lb-ft) using new bracket bolts that will be fitted to the height sensor brackets. The installation requires performing the direct opposite of all removal steps to achieve successful completion.
Height Sensor, Passenger Side
6L1Z-5359-CC
Q: How to service and repair the ride height sensor on Ford Expedition?
A:
The proper servicing and repair of ride height sensors requires the air suspension power to be switched off by using the air suspension switch inside the LH quarter trim panel because skipping this step could trigger unpredictable air spring deflation or inflation and result in vehicle movement during operations. The vehicle needs support during this operation after all power has been turned off. The sensor arm must be disconnected first before removing bolts that secure the sensor while removing the electrical connector. The installment procedure will be finished by following the backward steps used for removal.