How to Service and Repair the Inner Tie Rod End on Ford Focus?

A proper procedure for fixing or servicing the inner tie rod begins with steering gear removal. Make a record of the necessary turns to remove both the tie-rod end and its locknut. The first step involves taking out the tie-rod end along with its locknut then proceeding to take off the boot starting by removing the clamps. Separate the breather pipe when it exists. Use the vise to position the rack gear teeth while rotating the pinion until the teeth are visible so that the extensive tightening forces necessary for tie-rod removal can be countered. Vise jaw protectors should be present and the steering gear body needs to stay unclamped. The rack gear teeth will require securing through a vertical steering gear position when removing tie-rods. You can remove the tie-rod by utilizing a suitable pipe wrench when the steering gear rests inside the vise. After cleaning all thread locking compound from the rack use a suitable wrench to add the new tie-rod while applying thread locking compound to the inner threads. The boot installation requires new clamps while you should reattach breather pipes if present but maintain the same turn count from removal when securing the tie-rod end. Put the steering gear in place followed by a checking of the toe adjustment.

OEM Ford Focus Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Tie Rod Ends found

View related parts
Ford Focus Outer Tie Rod, Driver Side Part Number: BV6Z-3A130-F
$48.46 MSRP: $78.18
You Save: $29.72 (39%)
ADD TO CART
Product Specifications
- Other Name: Rod - Tie; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: LH - Outer
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric, S, SE, SEL, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Outer Tie Rod, Passenger Side Part Number: BV6Z-3A130-M
$59.45 MSRP: $97.82
You Save: $38.37 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Steering Tie Rod End, Right Outer; Outer Tie Rod End; Tie Rod End
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | RS, ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Outer Tie Rod, Driver Side Part Number: BV6Z-3A130-L
$49.28 MSRP: $81.09
You Save: $31.81 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Position: Outer Driver Side
- Replaces: BV6Z-3A130-H, MCF-2268
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | RS, ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Outer Tie Rod, Passenger Side Part Number: BV6Z-3A130-E
$52.49 MSRP: $86.36
You Save: $33.87 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod - Tie; Steering Tie Rod End, Right Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: RH - Outer
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2018 Ford Focus | Electric, S, SE, SEL, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Outer Tie Rod, Passenger Side Part Number: 8S4Z-3A130-B
$46.08 MSRP: $75.27
You Save: $29.19 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Right Outer; Outer Tie Rod End; Tie Rod End
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Outer Tie Rod, Driver Side Part Number: 8S4Z-3A130-A
$45.86 MSRP: $74.91
You Save: $29.05 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Outer Tie Rod, Driver Side Part Number: BV6Z-3A130-B
$60.78 MSRP: $100.00
You Save: $39.22 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Position: Outer Driver Side
- Replaces: AV6Z-3050-B, MCF-19, BV6Z-3050-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Ford Focus | Electric, S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Outer Tie Rod, Passenger Side Part Number: BV6Z-3A130-A
$60.78 MSRP: $100.00
You Save: $39.22 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Assembly - Ball; Steering Tie Rod End, Right Outer; Outer Tie Rod End; Tie Rod End
- Position: Outer Passenger Side
- Replaces: AV6Z-3050-C, BV6Z-3050-A, MCF-2234, MCF-2230
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Ford Focus | Electric, S, SE, SEL, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Focus Outer Tie Rod, Driver Side Part Number: YS4Z-3A130-BA
$21.90 MSRP: $29.81
You Save: $7.91 (27%)
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Connecting; Outer Tie Rod End; Tie Rod End
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Focus | LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Outer Tie Rod, Passenger Side Part Number: YS4Z-3A130-AA
$2.64 MSRP: $3.65
You Save: $1.01 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: End - Spindle Rod Cover; Outer Tie Rod End; Tie Rod End
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Focus | LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Outer Tie Rod, Driver Side Part Number: YS4Z-3A130-CA
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Left Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: LH, outer tie rod
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Focus | LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Outer Tie Rod Part Number: 5S4Z-3A130-AA
Product Specifications
- Other Name: End - Spindle Rod Connecting; Steering Tie Rod End, Outer; Outer Tie Rod End; Tie Rod End
- Manufacturer Note: RH/LH
- Position: Outer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford Focus | S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

Ford Focus Tie Rod End

OEM Tie Rod End boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Tie Rod End with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Tie Rod End is used in Ford Focus car type which is an integral part of steering assemblies where the steering rack is linked to the steering knuckles. This link is critical in the provision of vehicle stability as well as the ability to have direct control over it. The Tie Rod End consists of two components: The first one is called the inner tie rod end while the second one is known as the outer tie rod end, both in charge of making the right turns without any problem. There has been used different kinds of Tie Rod End in Ford Focus models over the years, but what difference is between these kinds is not indicated. However, the primary purpose which does not change is to provide the means of the proper steering and stability of the car, belonging to the Ford Focus brand. There is a significant role of the Tie Rod End in the vehicle and the key aspect in this case is the level of integrity.

Ford Focus Tie Rod End Parts and Q&A

Outer Tie Rod, Driver Side
YS4Z-3A130-CA
Q: How to Service and Repair the Inner Tie Rod End on Ford Focus?
A:
A proper procedure for fixing or servicing the inner Tie Rod begins with steering gear removal. Make a record of the necessary turns to remove both the tie-rod end and its locknut. The first step involves taking out the tie-rod end along with its locknut then proceeding to take off the boot starting by removing the clamps. Separate the breather pipe when it exists. Use the vise to position the rack gear teeth while rotating the pinion until the teeth are visible so that the extensive tightening forces necessary for tie-rod removal can be countered. Vise jaw protectors should be present and the steering gear body needs to stay unclamped. The rack gear teeth will require securing through a vertical steering gear position when removing tie-rods. You can remove the tie-rod by utilizing a suitable pipe wrench when the steering gear rests inside the vise. After cleaning all thread locking compound from the rack use a suitable wrench to add the new tie-rod while applying thread locking compound to the inner threads. The boot installation requires new clamps while you should reattach breather pipes if present but maintain the same turn count from removal when securing the tie-rod end. Put the steering gear in place followed by a checking of the toe adjustment.