How to service and repair the axle beam on F-250 and F-350 on Ford F-250 Super Duty?

Start axle beam servicing for F-250 and F-350 models by taking out the wheel spindle connected to the radius arm. Gain authorization for the right-hand pivot bolt extraction by elevating the left-hand axle. Proceed by taking out the pivot nut together with the bolt and axle. The pivot bushing requires examination for signs of wear and damage so you should replace it with a new one if needed. Secure the axle pivot nut after installation by having the suspension at curb height. The front axle should be positioned inside the pivot bracket while you install the pivot bolt and nut until they become snug. Replace the radius arm before putting back the wheel spindle. The final step includes torquing the axle pivot nut to 300 Nm (222 ft. lbs.) while the vehicle occupies curb height position followed by checking and adjusting the front end alignment. Corrosion-resistant parts must be selected for suspension fasteners because inferior components including non-equivalent parts can produce substantial service deficits which necessitate using the same component number or an approved equivalent part number for replacement. You should always maintain specified torque values during reassembly because they ensure proper retention of these critical components.

OEM Ford F-250 Super Duty Axle Beam

Rigid Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

65 Axle Beams found

View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-E
$3818.93 MSRP: $5657.67
You Save: $1838.74 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: HC3Z-5005-BS, LC3Z-5005-CB, LC3Z-5005-T, HC3Z-5005-CB, HC3Z-5005-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-H
$4095.81 MSRP: $6067.87
You Save: $1972.06 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AY
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-B
$4453.86 MSRP: $6598.32
You Save: $2144.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-BJ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Front Frame Part Number: NC3Z-5019-A
$3977.15 MSRP: $5892.07
You Save: $1914.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Replaces: JC3Z-5019-B, HC3Z-5019-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-E
$4498.98 MSRP: $6665.15
You Save: $2166.17 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-L
$5213.90 MSRP: $7724.30
You Save: $2510.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Front Frame Part Number: PC3Z-5019-G
$3767.55 MSRP: $5581.55
You Save: $1814.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: HC3Z-5005-CE
$3668.48 MSRP: $5434.78
You Save: $1766.30 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaced by: NC3Z-5005-H
- Replaces: HC3Z-5005-L, HC3Z-5005-AY
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-A
$3839.42 MSRP: $5688.03
You Save: $1848.61 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AQ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-D
$3993.30 MSRP: $5916.00
You Save: $1922.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AT
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: HC3Z-5005-CK
$3832.74 MSRP: $5678.13
You Save: $1845.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: HC3Z-5005-S, HC3Z-5005-AZ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-K
$3940.70 MSRP: $5838.07
You Save: $1897.37 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AN
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-F
$3774.23 MSRP: $5591.45
You Save: $1817.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: LC3Z-5005-U, LC3Z-5005-CC, HC3Z-5005-BA, HC3Z-5005-G, HC3Z-5005-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-K
$3892.76 MSRP: $5767.05
You Save: $1874.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: LC3Z-5005-CH, HC3Z-5005-CH, LC3Z-5005-Y
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-F
$4509.97 MSRP: $6681.43
You Save: $2171.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Front Frame Part Number: LC3Z-5019-A
$4977.02 MSRP: $7373.37
You Save: $2396.35 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Replaces: HC3Z-5019-A, JC3Z-5019-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-B
$3012.91 MSRP: $4463.57
You Save: $1450.66 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: HC3Z-5005-A, HC3Z-5005-AT, LC3Z-5005-BY, LC3Z-5005-Q, HC3Z-5005-BY
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-G
$6320.30 MSRP: $9363.40
You Save: $3043.10 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AX
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-J
$3937.05 MSRP: $5832.67
You Save: $1895.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: HC3Z-5005-CF, LC3Z-5005-X, LC3Z-5005-CG, HC3Z-5005-M, HC3Z-5005-CG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Front Frame Part Number: PC3Z-5019-F
$3439.18 MSRP: $5095.08
You Save: $1655.90 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS

| Page 1 of 4 |Next >

1-20 of 65 Results

Ford F-250 Super Duty Axle Beam

OEM Axle Beam boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Axle Beam with long life and a perfect fit. Come to our website and find genuine Ford F-250 Super Duty parts. We keep a wide inventory of OEM F-250 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford F-250 Super Duty Axle Beam Parts and Q&A

Front Crossmember
5C3Z-5C128-AA
Q: How to service and repair the axle beam on F-250 and F-350 on Ford F-250 Super Duty?
A:
Start axle beam servicing for F-250 and F-350 models by taking out the wheel spindle connected to the Radius Arm. Gain authorization for the right-hand pivot bolt extraction by elevating the left-hand axle. Proceed by taking out the pivot nut together with the bolt and axle. The pivot bushing requires examination for signs of wear and damage so you should replace it with a new one if needed. Secure the axle pivot nut after installation by having the suspension at curb height. The front axle should be positioned inside the pivot bracket while you install the pivot bolt and nut until they become snug. Replace the radius arm before putting back the wheel spindle. The final step includes torquing the axle pivot nut to 300 Nm (222 ft. lbs.) while the vehicle occupies curb height position followed by checking and adjusting the front end alignment. Corrosion-resistant parts must be selected for suspension fasteners because inferior components including non-equivalent parts can produce substantial service deficits which necessitate using the same component number or an approved equivalent part number for replacement. You should always maintain specified torque values during reassembly because they ensure proper retention of these critical components.