How to Service the Rear One-Piece Drive Shaft on Ford F-150?

Begin servicing the one-piece driveshaft by putting the vehicle in neutral position on a hoist. A temporary marking system should be applied to maintain alignment between the driveshaft flange and the pinion flange as well as the driveshaft and extension housing during installation. Four new bolts should replace the four driveshaft flange bolts during installation while their torque should be set at 103 Nm (76 lb-ft). Take special care when working with the driveshaft flange because it tightly joins with the flange pilot while hammering should be avoided for both driveshaft components. A correct tool can be utilized in the specific area to disconnect the driveshaft flange from the flange pilot. Plugging the extension housing will prevent fluid from leaking after the driveshaft removal. The reinstallation process requires driveshaft flanges to seat properly on the pinion flange pilots before bolts receive even cross-pattern tightening to prevent any damage. The threads of unavailable new bolts should receive a threadlock and sealer application. Reinstallation requires repositioning the removed driveshaft components using the index marks designed during the removal process.

How to Service and Repair the Front Drive Shaft on Ford F-150?

Start the front driveshaft service process by elevating the vehicle with neutral gear while providing adequate support. Use indexing marks to temporarily mark the flanges on the front and the pinion and on the rear and transfer case. Proceed by separating the front driveshaft with bolt removal. First secure both the transfer case flange and the pinion flange by removing four bolts. After that you can remove the four bolts attaching the rear flange to the transfer case and the remaining four bolts from the front flange to the pinion flange and finally extract the front driveshaft. The original bolts for attaching driveshaft to axle and transfer case cannot be replaced so coat their threads with Thread Lock and Sealer EOAZ-19554-AA which satisfies Ford specification WSK-M2G351-A5 or a matching alternative when new bolts are unavailable. Reinstall the system in the opposite order of steps used for removal.

OEM Ford F-150 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

254 Drive Shafts found

View related parts
Ford F-150 Drive Shaft, Rear Part Number: JL3Z-4602-G
$772.20 MSRP: $1056.00
You Save: $283.80 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2020 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: AL3Z-4R602-RB
$994.50 MSRP: $1360.00
You Save: $365.50 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: AL3Z-4R602-RA, 9L3Z-4R602-RE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford F-150 | FX2, STX, XL, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: EL3Z-4R602-B
$661.50 MSRP: $969.23
You Save: $307.73 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: EL3Z-4R602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014 Ford F-150 | FX2, King Ranch, Lariat, Limited, Platinum, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford F-150 Drive Shaft, Rear Part Number: FL3Z-4R602-AA
$801.57 MSRP: $1174.46
You Save: $372.89 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: FL3Z-4R602-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford F-150 | King Ranch, Lariat, Limited, Platinum, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford F-150 Drive Axle, Front Passenger Side Part Number: 3L3Z-3219-AA
$111.66 MSRP: $154.46
You Save: $42.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Drive Axle Shaft, Front Right; Axle Shaft; Axle Shafts; Axle Assembly
- Position: Front Passenger Side
- Replaces: F65Z-3219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2004 Ford F-150 | Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: ML3Z-4602-AA
$742.50 MSRP: $1015.38
You Save: $272.88 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Platinum, SSV, Tremor, XL, XLT | 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Drive Shaft Part Number: DL3Z-4R602-AK
$982.26 MSRP: $1343.26
You Save: $361.00 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: DL3Z-4R602-D, DL3Z-4R602-S
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford F-150 | FX2, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Platinum, STX, XL, XLT | 8 Cyl 5.0 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: ML3Z-4R602-DA
$827.89 MSRP: $1132.15
You Save: $304.26 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Platinum, SSV, XL, XLT | 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Drive Shaft Part Number: FL3Z-4R602-MB
$874.91 MSRP: $1196.46
You Save: $321.55 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: FL3Z-4R602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Raptor, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford F-150 Drive Shaft, Rear Part Number: JL3Z-4602-C
$735.08 MSRP: $1005.23
You Save: $270.15 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2020 Ford F-150 | Lariat, XL, XLT | 6 Cyl 2.7 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: JL3Z-4R602-AD
$883.58 MSRP: $1208.31
You Save: $324.73 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: JL3Z-4R602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2020 Ford F-150 | King Ranch, Lariat, Platinum, SSV, XL, XLT | 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Drive Shaft Part Number: DL3Z-4R602-AR
$720.00 MSRP: $984.62
You Save: $264.62 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: DL3Z-4R602-AB, DL3Z-4R602-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford F-150 | FX2, King Ranch, Lariat, Platinum, STX, XL, XLT | 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Drive Shaft Part Number: JL3Z-4R602-G
$815.51 MSRP: $1115.23
You Save: $299.72 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2020 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: ML3Z-4R602-KS
$847.69 MSRP: $1159.23
You Save: $311.54 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: ML3Z-4R602-R
$839.03 MSRP: $1147.38
You Save: $308.35 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Platinum, SSV, Tremor, XL, XLT | 8 Cyl 5.0 L FLEX
View related parts
Ford F-150 Drive Shaft Part Number: JL3Z-4R602-L
$801.90 MSRP: $1096.62
You Save: $294.72 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford F-150 | Lariat, XL, XLT | 6 Cyl 2.7 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: ML3Z-4R602-KW
$893.48 MSRP: $1221.85
You Save: $328.37 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021 Ford F-150 | King Ranch, Lariat, Platinum, XL, XLT | 6 Cyl 3.0 L DIESEL
View related parts
Ford F-150 Drive Shaft Part Number: DL3Z-4R602-AC
$722.25 MSRP: $987.69
You Save: $265.44 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: DL3Z-4R602-G, DL3Z-4R602-V
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014, 2009-2010 Ford F-150 | FX2, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX
View related parts
Ford F-150 Drive Shaft Part Number: KL3Z-4602-B
$808.09 MSRP: $1105.08
You Save: $296.99 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ford F-150 | Raptor | 6 Cyl 3.5 L GAS
View related parts
Ford F-150 Drive Shaft Part Number: ML3Z-4602-AJ
$740.03 MSRP: $1012.00
You Save: $271.97 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford F-150 | King Ranch, Lariat, Platinum, SSV, Tremor, XL, XLT | 6 Cyl 2.7 L GAS, 8 Cyl 5.0 L FLEX

| Page 1 of 13 |Next >

1-20 of 254 Results

Ford F-150 Drive Shaft

OEM Drive Shaft boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Drive Shaft with long life and a perfect fit. Come to our website and find genuine Ford F-150 parts. We keep a wide inventory of OEM F-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Drive Shaft in the opened case was discovered to play pivotal role of delivering the mechanical power and torque from the engine/transmission to the drive wheel as a fundamental input for the functioning of the F-150 vehicles. This component is intended to bear torsion and shear stress and yet be very light in order to minimize inertia. There are three types of Drive Shaft employed in Ford F-150 models; these include; one piece, two piece and slip in tube and each of them comes with special characteristics that make them ideal depending on the need of the vehicle. The one-piece driveshaft is preferred for its rigidity and ease of construction; the two-piece system proves useful in cases where alignment problems have to be dealt with over long transmission shaft lengths. Slip-in-tube driveshafts increase crash safety due to the fact that it offers the facility of collapsing. In the four-wheel and all-wheel drive vehicles, there are quite many driveshafts used and transfer cases are used to interchange power between the front and rear axle. In general, the driveshaft is crucial for the truck's proper functioning in various scenarios specifically in terms of F-150.

Ford F-150 Drive Shaft Parts and Q&A

Drive Shaft, Rear
5L3Z-4602-MA
Q: How to Service the Rear One-Piece Drive Shaft on Ford F-150?
A:
Begin servicing the one-piece driveshaft by putting the vehicle in neutral position on a hoist. A temporary marking system should be applied to maintain alignment between the driveshaft flange and the pinion flange as well as the driveshaft and extension housing during installation. Four new bolts should replace the four driveshaft flange bolts during installation while their torque should be set at 103 Nm (76 lb-ft). Take special care when working with the driveshaft flange because it tightly joins with the flange pilot while hammering should be avoided for both driveshaft components. A correct tool can be utilized in the specific area to disconnect the driveshaft flange from the flange pilot. Plugging the extension housing will prevent fluid from leaking after the driveshaft removal. The reinstallation process requires driveshaft flanges to seat properly on the pinion flange pilots before bolts receive even cross-pattern tightening to prevent any damage. The threads of unavailable new bolts should receive a threadlock and sealer application. Reinstallation requires repositioning the removed driveshaft components using the index marks designed during the removal process.
Drive Shaft
4L3Z-4602-AAB
Q: How to Service and Repair the Front Drive Shaft on Ford F-150?
A:
Start the front driveshaft service process by elevating the vehicle with neutral gear while providing adequate support. Use indexing marks to temporarily mark the flanges on the front and the pinion and on the rear and transfer case. Proceed by separating the front driveshaft with bolt removal. First secure both the transfer case flange and the pinion flange by removing four bolts. After that you can remove the four bolts attaching the rear flange to the transfer case and the remaining four bolts from the front flange to the pinion flange and finally extract the front driveshaft. The original bolts for attaching driveshaft to axle and transfer case cannot be replaced so coat their threads with Thread Lock and Sealer EOAZ-19554-AA which satisfies Ford specification WSK-M2G351-A5 or a matching alternative when new bolts are unavailable. Reinstall the system in the opposite order of steps used for removal.