How to remove and replace the front bumper cover on Ford Explorer Sport Trac?

Grounding operations for replacing the front bumper cover of the Explorer and its variants should start with headlamp assembly removal. The next procedure includes disconnecting both fog lamp electrical connections as well as side turn signal lamp electrical connections when these features are installed. Start by unscrewing and removing pin-type retainers which fasten the front fender inner splash shields before extracting both shields from their positions. At the bottom of the bumper cover remove the two bolts while also unfastening the six scrivets from the grille-to-grille opening panel. You can free the bump cover locking tabs using a flat-blade screwdriver and then remove the bumper cover-to-fender fasteners. The Mountaineer requires you to uninstall the screws situated on the top of the bumper cover. You must rotate the bottom section of the front bumper cover toward the top to free its three locking tabs through the top's application of downward pressure. The new front bumper cover installation demands you should reverse all removal steps.

How to remove and replace the rear bumper cover on Ford Explorer Sport Trac?

The process for removing the rear bumper cover of the Sport Trac, Explorer, and Mountaineer starts with unfastening the six screws before tightening them to 6 Nm (53 lb-in) when reattaching. The six splash shield rear bumper cover screws must be taken out starting with three screws on each side. When disconnecting the license plate electrical connector users should avoid bumping or twisting the bumper cover to prevent any form of damage. To separate the bumper cover from its retaining clips you should first pull each corner outward before moving them toward the rear. All essential components should be moved before reinstalling after performing the reversal of removal steps.

OEM Ford Explorer Sport Trac Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Bumpers found

View related parts
Ford Explorer Sport Trac Bumper Cover, Front Lower Part Number: 7L2Z-17D957-SA
$95.46 MSRP: $146.90
You Save: $51.44 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front Lower; Lower Cover
- Position: Front Lower
- Replaces: 7A2Z-17D957-SA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Impact Bar, Front Part Number: 1L5Z-17757-KA
$348.51 MSRP: $434.60
You Save: $86.09 (20%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement; Bumper Impact Bar, Front; Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Rear Part Number: 8A2Z-17K835-APTM
$256.93 MSRP: $377.28
You Save: $120.35 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Front Part Number: 8A2Z-17D957-APTM
$264.68 MSRP: $388.67
You Save: $123.99 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford Explorer Sport Trac | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Rear Lower Part Number: 7A2Z-17K835-DPTM
$506.93 MSRP: $744.38
You Save: $237.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Front Part Number: 6L2Z-17D957-VAPTM
$360.70 MSRP: $529.67
You Save: $168.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Impact Bar, Rear Part Number: 1L5Z-17906-AA
$550.56 MSRP: $815.65
You Save: $265.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper; Bumper Impact Bar, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Front Upper Part Number: 7L2Z-17D957-RBPTM
$150.96 MSRP: $219.73
You Save: $68.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front, Front Upper; Upper Cover
- Position: Front Upper
- Replaces: 6L2Z-17D957-RAPTM, 6L2Z-17D957-TAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Rear Lower Part Number: 7A2Z-17K835-EA
$278.47 MSRP: $408.92
You Save: $130.45 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Explorer Sport Trac | XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Rear Part Number: 4L5Z-17K835-AAA
$440.90 MSRP: $647.43
You Save: $206.53 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Explorer Sport Trac | Adrenalin, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Rear Part Number: 4L2Z-17K835-BAA
$241.86 MSRP: $299.15
You Save: $57.29 (20%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Explorer Sport Trac | Adrenalin, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Rear Part Number: 3L2Z-17K835-AAB
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport Trac | Base, XL, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Front Part Number: 4L5Z-17D957-GAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Explorer Sport Trac | Adrenalin, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Front Part Number: 4L5Z-17D957-FAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Explorer Sport Trac | Adrenalin, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Front Part Number: 4L2Z-17D957-NAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Explorer Sport Trac | Adrenalin, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Front Part Number: 1L5Z-17D957-FAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport Trac | Base, XL, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Bumper Cover, Front Part Number: 1L5Z-17D957-GAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Explorer Sport Trac | Base, XL, XLS, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer Sport Trac Impact Bar, Front Part Number: 1L5Z-17757-AA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement; Bumper Impact Bar, Front; Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Ford Explorer Sport Trac | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS

Ford Explorer Sport Trac Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford Explorer Sport Trac parts. We keep a wide inventory of OEM Explorer Sport Trac parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Explorer Sport Trac Bumper Parts and Q&A

Bumper Cover, Front
8A2Z-17D957-APTM
Q: How to remove and replace the front bumper cover on Ford Explorer Sport Trac?
A:
Grounding operations for replacing the front bumper cover of the Explorer and its variants should start with headlamp assembly removal. The next procedure includes disconnecting both fog lamp electrical connections as well as side turn signal lamp electrical connections when these features are installed. Start by unscrewing and removing pin-type retainers which fasten the front fender inner splash shields before extracting both shields from their positions. At the bottom of the bumper cover remove the two bolts while also unfastening the six scrivets from the grille-to-grille opening panel. You can free the bump cover locking tabs using a flat-blade screwdriver and then remove the bumper cover-to-fender fasteners. The Mountaineer requires you to uninstall the screws situated on the top of the bumper cover. You must rotate the bottom section of the front bumper cover toward the top to free its three locking tabs through the top's application of downward pressure. The new front bumper cover installation demands you should reverse all removal steps.
Bumper Cover, Rear Lower
7A2Z-17K835-DPTM
Q: How to remove and replace the rear bumper cover on Ford Explorer Sport Trac?
A:
The process for removing the rear bumper cover of the Sport Trac, Explorer, and Mountaineer starts with unfastening the six screws before tightening them to 6 Nm (53 lb-in) when reattaching. The six splash shield rear bumper cover screws must be taken out starting with three screws on each side. When disconnecting the license plate electrical connector users should avoid bumping or twisting the bumper cover to prevent any form of damage. To separate the bumper cover from its retaining clips you should first pull each corner outward before moving them toward the rear. All essential components should be moved before reinstalling after performing the reversal of removal steps.