How to remove and replace the Engine Control Module (PCM) for all on Ford Explorer?

The PCM removal process for all vehicles does not demand new keys when replacing the Engine Control Module. Start the procedure by obtaining the module configuration following the instructions of the Programmable Module Installation procedure. The air cleaner must be removed before beginning the work on vehicles that have a 4.6L (3V) engine. The procedure starts by disconnecting the RH front wheel speed sensor electrical connector followed by removing nut(s) until the A/C tube bracket(s) and wiring harness can be set aside. The installation begins with disconnecting the PCM connectors before removing the bolts that secure the PCM. Position the PCM along with its bolts then secure them at 10 Nm torque (89 lb-in). Connect the electrical connectors of PCM and then reposition the wiring harness with A/C tube bracket(s) before securing nut(s) tightly to 7 Nm (62 lb-in) while ensuring the RH front wheel speed sensor electrical connector remains connected. Install the air cleaner on vehicles running with a 4.6L (3V) engine. The last stage includes getting the module back to its original state through the Programmable Module Installation procedure while also conducting a PATS reprogram by performing the Parameter Reset procedure.

How to service the Engine Control Module on Ford Explorer?

Starting Engine Control Module service requires tool connection to the vehicle to obtain vehicle identification together with configuration data by using the correct worldwide diagnostic system hook-up procedure. Break the battery ground connection and loosen the PCM electrical connectors for disconnecting. Tighten every connector to 7 Nm (62 lb-in) before reinstallation. The installation of the PCM bracket requires nuts to be fastened at 8 Nm torque setting (71 lb-in). The first step involves removing the passenger door scuff plate before positioning the front door weather strip aside to take off the A-pillar lower trim panel. During the replacement process analyze the glove compartment screws first for removal and afterward remove the PCM bracket bolt which includes the PCM and bracket combination and reinstall it with bolt torque set to 10 Nm (89 lb-in). To complete the installation process detach the PCM from its bracket then perform the reverse steps of removal.

OEM Ford Explorer Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

71 Engine Control Modules found

View related parts
Ford Explorer Control Module Part Number: DU2Z-12A297-A
$60.00 MSRP: $98.73
You Save: $38.73 (40%)
ADD TO CART
Product Specifications
- Other Name: Module - Ignition; Ignition Control Module; Ignition Module; Computer; ECM
- Replaces: 5U2Z-12A297-A, E43Z-12A297-A, 5U2Z-12A297-C, E6SZ-12A297-A, DY-1074, DY-1076
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991 Ford Explorer | Eddie Bauer, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer PCM Part Number: CB5Z-12A650-CE
$495.65 MSRP: $727.83
You Save: $232.18 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); ECM; Module - Engine Control - Eec V; Engine Control Module
- Replaces: CB5Z-12A650-CC, CB5Z-12A650-CD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer PCM Part Number: DB5Z-12A650-VANP
$492.59 MSRP: $723.33
You Save: $230.74 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM; Module - Engine Control - Eec V
- Replaces: DB5Z-12A650-UB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2015 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer ECM Part Number: GB5Z-12A650-HANP
$902.25 MSRP: $1336.67
You Save: $434.42 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module; Module - Engine Control - Eec V
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Explorer | Platinum, Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer PCM Part Number: FB5Z-12A650-CANP
$882.00 MSRP: $1306.67
You Save: $424.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module; ECM; Module - Engine Control - Eec V
- Replaces: G2GZ-12A650-AB, G2GZ-12A650-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Explorer | Base, Limited, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Explorer PCM Part Number: CB5Z-12A650-FD
$494.41 MSRP: $726.00
You Save: $231.59 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); ECM; Module - Engine Control - Eec V; Engine Control Module
- Replaces: BB5Z-12A650-PJ, CB5Z-12A650-FC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer PCM Part Number: CB5Z-12A650-DE
$490.32 MSRP: $720.00
You Save: $229.68 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); ECM; Module - Engine Control - Eec V; Engine Control Module
- Replaces: CB5Z-12A650-DC, CB5Z-12A650-DD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer EEC Module Part Number: FL3Z-12A650-BEBNP
$496.90 MSRP: $729.67
You Save: $232.77 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; PCM; ECM; Module - Engine Control - Eec V
- Replaces: FL3Z-12A650-BEANP, FL3Z-12A650-BGANP, FL3Z-12A650-LANP
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer ECM Part Number: LB5Z-12A650-AHANP
$301.91 MSRP: $443.33
You Save: $141.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020 Ford Explorer | Base, Limited, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Explorer PCM Part Number: CB5Z-12A650-LF
$498.15 MSRP: $731.50
You Save: $233.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); ECM; Module - Engine Control - Eec V; Engine Control Module
- Replaces: CB5Z-12A650-LE, CB5Z-12A650-LD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer PCM Part Number: CB5Z-12A650-ED
$495.65 MSRP: $727.83
You Save: $232.18 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); ECM; Module - Engine Control - Eec V; Engine Control Module
- Replaces: BB5Z-12A650-NJ, CB5Z-12A650-EC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer ECM Part Number: LB5Z-12A650-GANP
$397.61 MSRP: $580.00
You Save: $182.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module
- Replaces: LB5Z-12A650-BANP
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2021 Ford Explorer | Base
View related parts
Ford Explorer PCM Part Number: FL3Z-12A650-CANP
$436.15 MSRP: $683.83
You Save: $247.68 (37%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM; Module - Engine Control - Eec V
- Replaces: GK4Z-12A650-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2019 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer ECM Part Number: LB5Z-12A650-AANP
$360.15 MSRP: $525.00
You Save: $164.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Limited Hybrid, Platinum Hybrid | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer ECM Part Number: MB5Z-12A650-A
$275.81 MSRP: $405.00
You Save: $129.19 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module
- Replaced by: MB3Z-12A650-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Explorer | Base, Limited, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Explorer PCM Part Number: DA8Z-12A650-AANP
$640.13 MSRP: $948.33
You Save: $308.20 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM; Module - Engine Control - Eec V
- Replaces: DA8Z-12A650-KF, DA8Z-12A650-TB, DA8Z-12A650-SB, DA8Z-12A650-KG, DA8Z-12A650-EJ, DB5Z-12A650-YA, DA5Z-12A650-BB, DA8Z-12A650-RB, DA8Z-12A650-XB, DA8Z-12A650-EH, DA8Z-12A650-VB, DA8Z-12A650-UB, DA8Z-12A650-FJ, DA8Z-12A650-FH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2015 Ford Explorer | Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer PCM Part Number: CB5Z-12A650-KD
$499.40 MSRP: $733.33
You Save: $233.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); ECM; Module - Engine Control - Eec V; Engine Control Module
- Replaces: BB5Z-12A650-TJ, CB5Z-12A650-KC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer PCM Part Number: BB5Z-12A650-ACJ
$219.70 MSRP: $303.93
You Save: $84.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Control - EEC; Engine Control Module (ECM); Module - Engine Control - Eec V
- Replaces: BB5Z-12A650-ACH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Ford Explorer | Base, Limited, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Explorer ECM Part Number: F5PZ-12A650-ARA
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1996 Ford Explorer | Eddie Bauer, Expedition, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Explorer ECM Part Number: F5PZ-12A650-APA
Product Specifications
- Other Name: Module - Engine Control; Engine Control Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1996 Ford Explorer | Eddie Bauer, Expedition, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS

| Page 1 of 4 |Next >

1-20 of 71 Results

Ford Explorer Engine Control Module

OEM Engine Control Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Control Module with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

One of the most essential factors that have made Ford Explorer stand high and be a hub of reliability and performance is the Engine Control Module or commonly referred to as the Ford Explorer ECM. Part of Ford Explorer that operates as the vehicle's electronic control unit, ECM collects signals from several sensors to ensure that all engine-related operations run at their optimal efficiency in terms of fuel/air mixture and ignition trigger timings. This particular technology for operation and sorting of ECM has emerged greatly, improving and refining the Explorer model from season 1991 to recent models. The Ford Explorer Engine Control Module correctly works with different models of the Explorer car to guarantee that every car receives optimal performance modifications. It is worthy to note that the ECM controls major operations inclusive of Idle speed and Variable valve timing making the driving experience more fluid and even enhancing the framing economy. Furthermore, the Ford Explorer Engine Control Module contains a section for performance tuning for added capability in modifying the car according to a specific driver's wants and needs. The service of the latter is complemented by the availability of not only new ECMs but also remanufactured ones, which helps the owners of these automobiles ensure that their vehicles can operate at their optimal. Off-road performance and flexibility along with family-oriented design have always been praised regarding the Ford Explorer, and the subsystem mentioned above plays a critical role in this regard. The Ford Explorer Engine Control Module offers innovations and compatibility which make it distinct in the automotive market stream; implementing the company's tradition of lucrative progress.

Ford Explorer Engine Control Module Parts and Q&A

ECM
6L2Z-12A650-BPBRM
Q: How to remove and replace the Engine Control Module (PCM) for all on Ford Explorer?
A:
The PCM removal process for all vehicles does not demand new keys when replacing the Engine Control Module. Start the procedure by obtaining the module configuration following the instructions of the Programmable Module Installation procedure. The air cleaner must be removed before beginning the work on vehicles that have a 4.6L (3V) engine. The procedure starts by disconnecting the RH front wheel speed sensor electrical connector followed by removing nut(s) until the A/C tube bracket(s) and wiring harness can be set aside. The installation begins with disconnecting the PCM connectors before removing the bolts that secure the PCM. Position the PCM along with its bolts then secure them at 10 Nm torque (89 lb-in). Connect the electrical connectors of PCM and then reposition the wiring harness with A/C tube bracket(s) before securing nut(s) tightly to 7 Nm (62 lb-in) while ensuring the RH front wheel speed sensor electrical connector remains connected. Install the air cleaner on vehicles running with a 4.6L (3V) engine. The last stage includes getting the module back to its original state through the Programmable Module Installation procedure while also conducting a PATS reprogram by performing the Parameter Reset procedure.
ECM
4U7Z-12A650-LFARM
Q: How to service the Engine Control Module on Ford Explorer?
A:
Starting Engine Control Module service requires tool connection to the vehicle to obtain vehicle identification together with configuration data by using the correct worldwide diagnostic system hook-up procedure. Break the battery ground connection and loosen the PCM electrical connectors for disconnecting. Tighten every connector to 7 Nm (62 lb-in) before reinstallation. The installation of the PCM bracket requires nuts to be fastened at 8 Nm torque setting (71 lb-in). The first step involves removing the passenger door scuff plate before positioning the front door Weather Strip aside to take off the A-pillar lower trim panel. During the replacement process analyze the glove compartment screws first for removal and afterward remove the PCM bracket bolt which includes the PCM and bracket combination and reinstall it with bolt torque set to 10 Nm (89 lb-in). To complete the installation process detach the PCM from its bracket then perform the reverse steps of removal.