How to Service and Repair the Hood Cable on Ford Excursion?

The first step when servicing the hood cable should be to disconnect the battery. Start by removing both the hood latch followed by its pin-type retainers. You must set the air deflector to reach the hood cable guide before taking out the guide together with any other remaining guides. The powertrain control module (PCM) alongside the A-pillar lower trim panel both need to be taken off. The vehicle must support the hood latch release/park brake bracket after you remove all the nuts from this section of the vehicle. Release the cable conduit then detach the hood cable from its handle. Before finishing the installation process remove the hood cable and dash panel grommet through the front access point of the vehicle. The reverse steps of installation should follow the removal procedure.

OEM Ford Excursion Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

View related parts
Ford Excursion Release Cable, Front Part Number: 5C3Z-16916-AA
$30.64 MSRP: $43.47
You Save: $12.83 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Control; Hood Release Cable, Front; Hood Release Cable
- Manufacturer Note: Cable Asy
- Position: Front
- Replaces: F81Z-16916-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford Excursion Release Handle, Front Part Number: F81Z-16916-AB
$33.91 MSRP: $49.37
You Save: $15.46 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Hood Control; Hood Release Handle, Front; Hood Release Cable, Front; Release Cable; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

Ford Excursion Hood Cable

OEM Hood Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Hood Cable with long life and a perfect fit. Come to our website and find genuine Ford Excursion parts. We keep a wide inventory of OEM Excursion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Excursion Hood Cable Parts and Q&A

Release Cable, Front
5C3Z-16916-AA
Q: How to Service and Repair the Hood Cable on Ford Excursion?
A:
The first step when servicing the hood cable should be to disconnect the battery. Start by removing both the Hood Latch followed by its pin-type retainers. You must set the Air Deflector to reach the hood cable guide before taking out the guide together with any other remaining guides. The powertrain control module (PCM) alongside the A-pillar lower trim panel both need to be taken off. The vehicle must support the hood latch release/park brake bracket after you remove all the nuts from this section of the vehicle. Release the cable conduit then detach the hood cable from its handle. Before finishing the installation process remove the hood cable and dash panel grommet through the front access point of the vehicle. The reverse steps of installation should follow the removal procedure.