How to Service the LH Halfshaft Wheel Seal on the 6F50 Transaxle on Ford Edge?

The LH halfshaft seal service requires the 6F50 transaxle vehicle to be placed in neutral position while mounted on a hoist. Check for damage or wear conditions in the halfshaft hub before replacing it if detected during inspection. Before proceeding examine the differential seal face in addition to inspecting the halfshaft bushing contact surface and the side gear differential splines. Before removing the seal you should drill a small hole in the halfshaft seal with an appropriate awl tool followed by a dent puller extraction. The Cover Axle Seal Installer with Handle allows you to mount a new halfshaft seal for the installation of the LH front halfshaft seal. Install the front LH halfshaft followed by transmission fluid addition until reaching the specified level. Plunge to the early build vehicles with Mercon(R) V fluid and late build vehicles require Mercon(R) LV fluid yet avoid mixing these fluids because it can trigger erratic shifting and damage the transmission.

OEM Ford Edge Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Seals found

View related parts
Ford Edge Axle Seal, Rear Driver Side Part Number: 5L8Z-4B416-AA
$14.61 MSRP: $21.27
You Save: $6.66 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal; Drive Axle Shaft Seal, Front Left; Rear; CV Axle Shaft Seal, Front; Left; Rear.; Axle Seals; Side Seal; Outer Seal; Inner Joint Assembly Seal; Drive Axle Shaft Seal
- Manufacturer Note: 58mm
- Position: Rear Driver Side
- Replaces: F57Z-3254-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2012 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Axle Seal, Rear Part Number: CV6Z-4B416-D
$45.55 MSRP: $65.17
You Save: $19.62 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal; Drive Axle Shaft Seal, Rear; CV Axle Shaft Seal, Rear; CV Axle Shaft Seal; Differential Seal; Output Shaft Seal; Axle Seals; Side Seal
- Position: Rear
- Replaces: CV6Z-4B416-C, CV6Z-4B416-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2024 Ford Edge | Limited, SE, SEL, Sport, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

Ford Edge Wheel Seal

OEM Wheel Seal boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Wheel Seal with long life and a perfect fit. Come to our website and find genuine Ford Edge parts. We keep a wide inventory of OEM Edge parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

In other words, the Wheel Seal of Ford Edge vehicles is responsible for shielding the hub and bearing from matters such as rocks, debris, and dirt. Lubrication is also another factor that should be put into consideration to avoid overheating and brittleness of the metal. It is advised to check for leakages or cracks for proper functionality to be observed. We have many more selections of front and rear inner and outer wheel seals and complete wheel seal kits from Motorcraft, Timken, and many others. These high-grade materials ensure trucks, car, and even SUVs for increased accuracy when fitting the wheel bearing assembly.

Ford Edge Wheel Seal Parts and Q&A

Axle Seal, Rear Driver Side
5L8Z-4B416-AA
Q: How to Service the LH Halfshaft Wheel Seal on the 6F50 Transaxle on Ford Edge?
A:
The LH halfshaft seal service requires the 6F50 transaxle vehicle to be placed in neutral position while mounted on a hoist. Check for damage or wear conditions in the halfshaft hub before replacing it if detected during inspection. Before proceeding examine the differential seal face in addition to inspecting the halfshaft bushing contact surface and the side gear differential splines. Before removing the seal you should drill a small hole in the halfshaft seal with an appropriate awl tool followed by a dent puller extraction. The Cover Axle Seal Installer with Handle allows you to mount a new halfshaft seal for the installation of the LH front halfshaft seal. Install the front LH halfshaft followed by transmission fluid addition until reaching the specified level. Plunge to the early build vehicles with Mercon(R) V fluid and late build vehicles require Mercon(R) LV fluid yet avoid mixing these fluids because it can trigger erratic shifting and damage the transmission.