How to service and repair the power mirror switch on Ford Crown Victoria?

Service and repair of the power mirror switch begins by using a shop towel or equivalent protective material on the front door trim panel surface. Remove the front side of the window regulator switch plate from the front door piece then place it to one side. Two locking tabs along with disconnecting the electrical connector will enable you to remove the exterior mirror control switch. The installation process ends by performing the opposite steps of disassembly.

OEM Ford Crown Victoria Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Mirror Switches found

View related parts
Ford Crown Victoria Mirror Switch Part Number: F2AZ-17B676-A
$36.51 MSRP: $49.68
You Save: $13.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Lever Assembly - Mirror Control; Power Mirror Switch
- Manufacturer Note: W/POWER MIRROR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Mirror Switch, Front Driver Side Part Number: F5TZ-17B676-A
Product Specifications
- Other Name: Lever Assembly - Mirror Control; Door Mirror Switch, Front Left; Power Mirror Switch; Switch
- Manufacturer Note: Black, all w/power mirror
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2008 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Mirror Switch, Front Driver Side Part Number: 8F9Z-17B676-A
$22.60 MSRP: $32.05
You Save: $9.45 (30%)
Product Specifications
- Other Name: Lever Assembly - Mirror Control; Door Mirror Switch, Front, Front Left; Power Mirror Switch; Lever
- Position: Front Driver Side
- Replaces: 5F9Z-17B676-AAA, 7F9Z-17B676-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Mirror Switch Part Number: F2TZ-17B676-A
Product Specifications
- Other Name: Switch - Electrical; Power Mirror Switch; Switch - Electrically Operated Mirror
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Mirror Switch

OEM Mirror Switch boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Mirror Switch with long life and a perfect fit. Come to our website and find genuine Ford Crown Victoria parts. We keep a wide inventory of OEM Crown Victoria parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Crown Victoria Mirror Switch is a part that has the responsibility of reinforcing the capabilities as well as the safety of the Ford Crown Victoria, a luxury sedan car notable for its durability. This Mirror Switch which is usually located on the driver side door helps change the side mirrors to the most appropriate position for the driver to see clearly. Controlled by easy to reach buttons, this Ford Crown Victoria Mirror Switch makes it easier to set preferred position of both side rear view mirrors of the driver and the passenger's side and minimizes inefficient drive time. Availability in one universal design allows this Mirror Switch to satisfy the simplest and the most complex requirements, starting with signal and ending with power folding and electrochromic options. The feature of power folding is helpful in areas of less space where the mirrors can be damaged, whereas electrochromic option helps in adjusting the mirror tint depending on the light conditions thus avoiding eye irritation. Since the Ford Crown Victoria is an economic, powerful, and compact car, adequate emphasis is placed on the products used in the vehicle which includes the Mirror Switch. Their function is to improve the practicality of the car and the safety of the driver and the passengers through the enhanced visibility that comes with using the car. Due to its stylish appearance and simplicity the Ford Crown Victoria can be considered an asset within the automotive industry today, and its performance guarantees the car a constant sale.

Ford Crown Victoria Mirror Switch Parts and Q&A

Mirror Switch, Front Driver Side
F5TZ-17B676-A
Q: How to service and repair the power mirror switch on Ford Crown Victoria?
A:
Service and repair of the power mirror switch begins by using a shop towel or equivalent protective material on the front door trim panel surface. Remove the front side of the window regulator switch plate from the front door piece then place it to one side. Two locking tabs along with disconnecting the electrical connector will enable you to remove the exterior mirror control switch. The installation process ends by performing the opposite steps of disassembly.