How to service the Knock Sensor (KS) on 2009 Lincoln Town Car?

In order to service the Knock Sensor (KS), the first thing would be to remove the intake manifold. Next disconnect the KS electric connector and remove the nut that holds the KS. To install the new KS, the screw should be tightened to 20 Nm (177 lb-in) and the reverse procedure to install the screw should be followed.

OEM 2009 Lincoln Town Car Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2009 Lincoln Town Car Knock Sensor Part Number: XL3Z-12A699-AA
$36.93 MSRP: $57.64
You Save: $20.71 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
- Base No.: 12A699
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 2.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-12A699-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Lincoln Town Car Knock Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car Knock Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car Knock Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Town Car Knock Sensor Parts Q&A

Q: How to service the Knock Sensor (KS) on 2009 Lincoln Town Car?
A: In order to service the Knock Sensor (KS), the first thing would be to remove the intake manifold. Next disconnect the KS electric connector and remove the nut that holds the KS. To install the new KS, the screw should be tightened to 20 Nm (177 lb-in) and the reverse procedure to install the screw should be followed.