How to service and repair the Neutral Safety Switch for the 4R70E/4R75E on 2009 Ford E-150?

To install the Transmission Position Switch/Sensor 4R70E/4R75E, make sure the car is in neutral, and then disconnect the TR sensor connector and selector lever cable, then remove the manual control lever. Install TR sensor making sure it is aligned and tighten bolts. Redo the cables and reconnect the manual control lever.

OEM 2009 Ford E-150 Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

View related parts
2009 Ford E-150 Neutral Safety Switch Part Number: F7LZ-7F293-AB
$56.57 MSRP: $91.27
You Save: $34.70 (39%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Manual Lever Position; Transmission Range Sensor; Transmiss Range Sensor; Range Sensor; Back-Up & Neutral Safety Switch; Sensor - Manual Lever Position - Mlps
- Replaces: F7LZ-7F293-AA
- Base No.: 7F293
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.3 x 7.6 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7LZ-7F293-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2009 Ford E-150 Neutral Safety Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-150 Neutral Safety Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-150 Neutral Safety Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford E-150 Neutral Safety Switch Parts Q&A

Q: How to service and repair the Neutral Safety Switch for the 4R70E/4R75E on 2009 Ford E-150?
A: To install the Transmission Position Switch/Sensor 4R70E/4R75E, make sure the car is in neutral, and then disconnect the TR sensor connector and selector lever cable, then remove the manual control lever. Install TR sensor making sure it is aligned and tighten bolts. Redo the cables and reconnect the manual control lever.