How to Service the Fuel Pressure Sensor on the Fuel Rail on 2008 Mercury Mariner?

When servicing the fuel rail pressure and temperature sensor, keep the area safe by not coming in contact with flames that touch the fuel parts. De pressurize fuel system, remove battery ground, and take out sensor. Install the new sensor and tighten it to 5 Nm, check and lubricate the O-ring seal then reassemble.

OEM 2008 Mercury Mariner Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2008 Mercury Mariner Pressure Sensor Part Number: 3F2Z-9G756-AC
$84.64 MSRP: $139.27
You Save: $54.63 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
- Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
- Base No.: 9F972
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-9G756-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mariner Submodels:
- Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Mercury Mariner Fuel Pressure Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mariner Fuel Pressure Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mariner Fuel Pressure Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Mariner Fuel Pressure Sensor Parts Q&A

Q: How to Service the Fuel Pressure Sensor on the Fuel Rail on 2008 Mercury Mariner?
A: When servicing the fuel rail pressure and temperature sensor, keep the area safe by not coming in contact with flames that touch the fuel parts. De pressurize fuel system, remove battery ground, and take out sensor. Install the new sensor and tighten it to 5 Nm, check and lubricate the O-ring seal then reassemble.