My Garage
Cart

OEM 2007 Lincoln MKX Exhaust Pipe

Exhaust Tail Pipe
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Exhaust Pipe found

  • 2007 Lincoln MKX Exhaust Pipe - 9T4Z-5G274-A
    2007 Lincoln MKX Exhaust Pipe Diagram - 9T4Z-5G274-A
    View related parts

    2007 Lincoln MKX Exhaust Pipe, Rear Part Number: 9T4Z-5G274-A

    $738.79 MSRP: $980.15
    You Save: $241.36 (25%)
    ADD TO CART
    Product Specifications
    • Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe, Rear; Exhaust Y Pipe; Tail Pipe; Front Pipe; Intermediate Pipe; Extension Pipe
    • Position: Rear
    • Replaces: 7T4Z-5G274-AA, 7T4Z-5G203-AA, 8T4Z-5G274-A, 8T4Z-5G203-B, 8T4Z-5G203-A
    • Base No.: 5G274
    • Item Weight: 12.40 Pounds
    • Item Dimensions: 9.1 x 4.2 x 23.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 9T4Z-5G274-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Lincoln MKX Submodels:
    • Base | 6 Cyl 3.5 L GAS

2007 Lincoln MKX Exhaust Pipe

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln MKX Exhaust Pipe available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln MKX Exhaust Pipe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln MKX Exhaust Pipe Parts Q&A

  • Q: How to Service the Exhaust Pipe on 2007 Lincoln MKX?
    A: Service the exhaust flexible pipe by first placing the vehicle in neutral position on a hoist. New fasteners and gaskets must be used during installation and the flange faces need cleaning to guarantee proper sealing of the new gasket. Humans should remove both exhaust flexible pipe nuts from their position between the flexible pipe and exhaust Y-pipe before discarding the old gasket. You should tighten the reinstall nuts to 40 Nm which equals 30 ft. lbs. Proceed by removing the Torca(R) clamp and using several wrenches to detach two exhaust flexible pipe isolators that will expose the exhaust flexible pipe. To install the parts follow the reverse steps and apply new gaskets and nuts. Start the car engine to verify exhaust leaks exist after finishing the installation.

Related 2007 Lincoln MKX Parts