How to Service the Brake Light Switch on 2007 Ford Five Hundred?

To maintain the stoplamp switch, disconnect the electrical connector and push the brake pedal lightly until the switch is removed by turning the switch 45 degrees clockwise. Install it without touching the brake pedal, rotate it counterclockwise and then re-connect the connector. Check the stoplamps by pressing the brake and continuing to press the brake when the engine is on.

OEM 2007 Ford Five Hundred Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2007 Ford Five Hundred Stoplamp Switch Part Number: 3M5Z-13480-AB
$23.70 MSRP: $37.64
You Save: $13.94 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch
- Replaces: 3M5Z-13480-AA
- Base No.: 13480
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 2.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M5Z-13480-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Five Hundred Submodels:
- Limited, SE, SEL | 6 Cyl 3.0 L GAS

2007 Ford Five Hundred Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Five Hundred Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Five Hundred Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Five Hundred Brake Light Switch Parts Q&A

Q: How to Service the Brake Light Switch on 2007 Ford Five Hundred?
A: To maintain the stoplamp switch, disconnect the electrical connector and push the brake pedal lightly until the switch is removed by turning the switch 45 degrees clockwise. Install it without touching the brake pedal, rotate it counterclockwise and then re-connect the connector. Check the stoplamps by pressing the brake and continuing to press the brake when the engine is on.