How to Service the Yaw Sensor on 2006 Mercury Mountaineer?

To service the yaw rate sensor, disconnect battery ground, remove driver side floor console panel and the LH instrument panel brace (tighten to 9 Nm when reinstalled). Unscrew stability control sensor cluster disconnection, loosen the bracket nut (tighten to 7 Nm) of the sensor cluster, connect the new cluster and calibrate the ABS module accordingly.

OEM 2006 Mercury Mountaineer Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

View related parts
2006 Mercury Mountaineer Yaw Rate Sensor Part Number: 7L1Z-3C187-A
Product Specifications
- Other Name: Sensor Assembly; Suspension Yaw Sensor; Steering Wheel Speed Sensor; Yaw Sensor; Sensor
- Manufacturer Note: Lateral/Yaw Sensor
- Base No.: 3C187
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.3 x 2.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-3C187-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Mercury Mountaineer Yaw Rate Sensor Part Number: 6L2Z-3C187-AA
Product Specifications
- Other Name: Sensor Assembly; Suspension Yaw Sensor; Steering Wheel Speed Sensor; Yaw Sensor; Sensor
- Manufacturer Note: Lateral/Yaw Sensor
- Replaces: 3C5Z-3C187-AB
- Base No.: 3C187
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-3C187-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2006 Mercury Mountaineer Yaw Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Mountaineer Yaw Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Mountaineer Yaw Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Mercury Mountaineer Yaw Sensor Parts Q&A

Q: How to Service the Yaw Sensor on 2006 Mercury Mountaineer?
A: To service the yaw rate sensor, disconnect battery ground, remove driver side floor console panel and the LH instrument panel brace (tighten to 9 Nm when reinstalled). Unscrew stability control sensor cluster disconnection, loosen the bracket nut (tighten to 7 Nm) of the sensor cluster, connect the new cluster and calibrate the ABS module accordingly.