How to Service and Repair a 6-Way Power Seat Switch Safely on 2006 Ford Expedition?

Service of the 6-way power seat switch begins with moving the seat to enable access to all floor-mounted fasteners. The supplemental restraint system requires depowering because the air bag warning lamp will come on during RCM fuse removal when the ignition is turned on yet this is normal and does not signal any fault. The vehicle requires complete system status clearance and no evident faults before its delivery to the customer. The removal of the 40 percent seat begins with disconnecting its electrical connector which controls the 6-way power seat switch located beneath the seat. To start proceed with the recliner handle by removing the screw cover and screw followed by gentle pulling of the lumbar knob from both sides while being cautious to avoid damaging the components. When removing the screw from the seat cushion side shield at the base of the lumbar knob users should avoid scratching the side shield while getting the power seat switch knob loose. The front cushion side shield screw must be removed first before pulling on both center and rear retainers to free the cushion side shield from its position. Remove the two screws from the 6-way seat control switch before taking the switch out of the cushion side shield. The installation is complete by reversing the removal procedure and replacing the 40 percent seat along with activating SRS power. Safety glasses should be worn during work on air bag and safety belt pretensioner vehicles to minimize the chance of injury and never use memory saver accessories.

OEM 2006 Ford Expedition Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Seat Switches found

View related parts
2006 Ford Expedition Switch Assembly, Passenger Side Part Number: 2L1Z-14C715-ABC
$46.60 MSRP: $66.67
You Save: $20.07 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Switch - Third Row Power Folding Seat
- Position: Passenger Side
- Base No.: 14C715A
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.0 x 3.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14C715-ABC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford Expedition Control Switch, Front Part Number: 1L2Z-14A701-AA
$55.25 MSRP: $90.91
You Save: $35.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Power Seat Switch, Front; Seat Lumbar Switch, Left; Power Seat Switch, Left; Power Seat Switch; Seat Switch; Switch Assembly Harness; Adjuster Switch; Switch
- Position: Front
- Base No.: 14A701
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.7 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-14A701-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford Expedition Switch Assembly, Driver Side Part Number: 2L1Z-14D695-AAA
$88.75 MSRP: $120.77
You Save: $32.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Seat Heater Switch; Switch
- Position: Driver Side
- Base No.: 14D694
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14D695-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford Expedition Switch Assembly, Passenger Side Part Number: 2L1Z-14D694-AAA
$88.53 MSRP: $120.47
You Save: $31.94 (27%)
ADD TO CART
Product Specifications
- Other Name: Seat Heater Switch; Switch
- Position: Passenger Side
- Base No.: 14D694
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14D694-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford Expedition Switch Assembly, Passenger Side Part Number: 2L1Z-14C715-AAC
$29.38 MSRP: $41.67
You Save: $12.29 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Seat Switch; Seat Switch
- Manufacturer Note: Switch - Third Row Power Folding Seat
- Position: Passenger Side
- Base No.: 14C715
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.6 x 2.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-14C715-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2006 Ford Expedition Memory Switch, Front Driver Side Part Number: 7L3Z-14776-AA
$29.38 MSRP: $41.67
You Save: $12.29 (30%)
Product Specifications
- Other Name: Switch Assembly; Seat Memory Switch, Front, Front Left; Power Seat Switch
- Manufacturer Note: BLACK
- Position: Front Driver Side
- Replaces: 2L1Z-14776-AA
- Base No.: 14776
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.3 x 5.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-14776-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2006 Ford Expedition Seat Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Expedition Seat Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Expedition Seat Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Expedition Seat Switch Parts Q&A

Q: How to Service and Repair a 6-Way Power Seat Switch Safely on 2006 Ford Expedition?
A: Service of the 6-way power seat switch begins with moving the seat to enable access to all floor-mounted fasteners. The supplemental restraint system requires depowering because the air bag warning lamp will come on during RCM fuse removal when the ignition is turned on yet this is normal and does not signal any fault. The vehicle requires complete system status clearance and no evident faults before its delivery to the customer. The removal of the 40 percent seat begins with disconnecting its electrical connector which controls the 6-way power seat switch located beneath the seat. To start proceed with the recliner handle by removing the screw cover and screw followed by gentle pulling of the lumbar knob from both sides while being cautious to avoid damaging the components. When removing the screw from the seat cushion side shield at the base of the lumbar knob users should avoid scratching the side shield while getting the power seat switch knob loose. The front cushion side shield screw must be removed first before pulling on both center and rear retainers to free the cushion side shield from its position. Remove the two screws from the 6-way seat control switch before taking the switch out of the cushion side shield. The installation is complete by reversing the removal procedure and replacing the 40 percent seat along with activating SRS power. Safety glasses should be worn during work on air bag and safety belt pretensioner vehicles to minimize the chance of injury and never use memory saver accessories.