What precautions should be taken when servicing the front seat cushion and what steps are involved in the process on 2005 Lincoln Aviator?

Safety glasses should be worn while servicing the front seat cushion because they reduce the chances of unintentional air bag deployment injuries. Start all procedures by disabling the supplemental restraint system (SRS) since the SRS must be fault-free and operational throughout the customer-owned period. Begin by putting the seat in a suitable position to access the four mounting bolts before uninstalling the front seat and backrest. Installation of the new bolts from the seat fastener service kit requires disconnecting the two electrical connectors to remove the safety belt buckle pretensioner with its old bolts for replacement. Install the bolts by torquing them to 40 Nm (30 lb-ft). The procedure starts with disconnection of the climate controlled seat module (CCSM) followed by removal of the driver seat module and its mounting bracket until the seat position sensor can be detached. The removal process starts by disconnecting power from the climate controlled seat cushion duct and fan filter and fan components using an electrical connector then extracting three screws before uninstalling the fan bracket. Start by disconnecting the electrical connector then taking out the seat cushion thermo-electric device (TED) with its mounting plate while removing the screw. Throw away the two recliner roll pins then separate the recliner assembly from its position after extracting the cushion support through the seat track and frame assembly connection points. Reinstallation of the front seat backrest and front seat needs to be performed following the reverse order of disassembly while SRS must be repowered during this sequence.

OEM 2005 Lincoln Aviator Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Cushions found

View related parts
2005 Lincoln Aviator Pad Part Number: 2C5Z-7864810-AA
Product Specifications
- Manufacturer Note: RH/LH
- Base No.: <64810
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2C5Z-7864810-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Aviator Seat Cushion Pad, Rear Driver Side Part Number: 2C5Z-7863841-BA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear Driver Side
- Base No.: <63840B
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-7863841-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Aviator Seat Cushion Pad, Rear Driver Side Part Number: 2C5Z-7863841-AA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear Driver Side
- Base No.: <63840C
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-7863841-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Aviator Seat Cushion, Rear Part Number: 2C5Z-7863840-CA
Product Specifications
- Other Name: Pad - Rear Seat Cushion
- Position: Rear
- Base No.: <63840
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-7863840-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Aviator Seat Cushion Pad, Rear Passenger Side Part Number: 2C5Z-7863840-BA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear Passenger Side
- Base No.: <63840A
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-7863840-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Aviator Seat Cushion Pad, Rear Passenger Side Part Number: 2C5Z-7863840-AB
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear Passenger Side
- Base No.: <63840A
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-7863840-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Aviator Seat Cushion Pad, Rear Center Part Number: 2C5Z-7863840-AA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear Center
- Base No.: <63840B
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-7863840-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Aviator Seat Back Pad Part Number: 2C5Z-78632A22-AA
Product Specifications
- Other Name: Pad
- Manufacturer Note: RH/LH
- Base No.: <632A22
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2C5Z-78632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2005 Lincoln Aviator Seat Back Pad Part Number: 2C5Z-78632A22-BA
Product Specifications
- Other Name: Pad
- Manufacturer Note: RH/LH
- Base No.: <632A22
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2C5Z-78632A22-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Aviator Submodels:
- Base | 8 Cyl 4.6 L GAS

2005 Lincoln Aviator Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Aviator Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Aviator Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln Aviator Seat Cushion Parts Q&A

Q: What precautions should be taken when servicing the front seat cushion and what steps are involved in the process on 2005 Lincoln Aviator?
A: Safety glasses should be worn while servicing the front seat cushion because they reduce the chances of unintentional air bag deployment injuries. Start all procedures by disabling the supplemental restraint system (SRS) since the SRS must be fault-free and operational throughout the customer-owned period. Begin by putting the seat in a suitable position to access the four mounting bolts before uninstalling the front seat and backrest. Installation of the new bolts from the seat fastener service kit requires disconnecting the two electrical connectors to remove the safety belt buckle pretensioner with its old bolts for replacement. Install the bolts by torquing them to 40 Nm (30 lb-ft). The procedure starts with disconnection of the climate controlled seat module (CCSM) followed by removal of the driver seat module and its mounting bracket until the seat position sensor can be detached. The removal process starts by disconnecting power from the climate controlled seat cushion duct and fan filter and fan components using an electrical connector then extracting three screws before uninstalling the fan bracket. Start by disconnecting the electrical connector then taking out the seat cushion thermo-electric device (TED) with its mounting plate while removing the screw. Throw away the two recliner roll pins then separate the recliner assembly from its position after extracting the cushion support through the seat track and frame assembly connection points. Reinstallation of the front seat backrest and front seat needs to be performed following the reverse order of disassembly while SRS must be repowered during this sequence.