How to Service and Repair the A/C Condenser Core of the HVAC System on 2004 Lincoln LS?

In order to fix the HVAC condenser core, lift the car in neutral, recover refrigerant, and delete an underbody shield. Install, evacuate, leak test, and charge the system, follow the given removal order and lubricate using clean PAG oil during installation. Only change receiver drier in case it is contaminated, and lubricate new O-rings.

OEM 2004 Lincoln LS A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Condenser found

View related parts
2004 Lincoln LS Condenser Part Number: 6W4Z-19712-A
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser; Condenser A/C
- Replaces: XW4Z-19712-AA
- Base No.: 19712
- Item Weight: 9.20 Pounds
- Item Dimensions: 6.1 x 33.9 x 21.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W4Z-19712-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Lincoln LS Submodels:
- Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2004 Lincoln LS A/C Condenser

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Lincoln LS A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Lincoln LS A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Lincoln LS A/C Condenser Parts Q&A

Q: How to Service and Repair the A/C Condenser Core of the HVAC System on 2004 Lincoln LS?
A: In order to fix the HVAC condenser core, lift the car in neutral, recover refrigerant, and delete an underbody shield. Install, evacuate, leak test, and charge the system, follow the given removal order and lubricate using clean PAG oil during installation. Only change receiver drier in case it is contaminated, and lubricate new O-rings.