How to service and repair the A/C Condenser on 2002 Mercury Villager?

Servicing the HVAC condenser, eliminate the A/C refrigerant, take out the radiator, and unhook the A/C condenser core with the compressor and auxiliary lines. Installation is the same process, only reverse to remove the core bolts then repeat the steps to install, lubricating with PAG Compressor Oil. Only in case contamination is observed, replace the suction accumulator.

OEM 2002 Mercury Villager A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Condenser found

View related parts
2002 Mercury Villager Condenser Part Number: XF5Z-19712-AA
$228.37 MSRP: $313.33
You Save: $84.96 (28%)
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Manufacturer Note: integral A/C
- Base No.: 19712
- Item Weight: 6.40 Pounds
- Item Dimensions: 8.3 x 18.4 x 35.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF5Z-19712-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Mercury Villager Submodels:
- Base, Estate, Sport | 6 Cyl 3.3 L GAS

2002 Mercury Villager A/C Condenser

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Villager A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Villager A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Mercury Villager A/C Condenser Parts Q&A

Q: How to service and repair the A/C Condenser on 2002 Mercury Villager?
A: Servicing the HVAC condenser, eliminate the A/C refrigerant, take out the radiator, and unhook the A/C condenser core with the compressor and auxiliary lines. Installation is the same process, only reverse to remove the core bolts then repeat the steps to install, lubricating with PAG Compressor Oil. Only in case contamination is observed, replace the suction accumulator.